SPMIIDR_EL1, System PMU Implementation Identification Register

The SPMIIDR_EL1 characteristics are:

Purpose

Provides discovery information for System PMU <s>.

Configuration

This register is present only when FEAT_SPMU is implemented. Otherwise, direct accesses to SPMIIDR_EL1 are UNDEFINED.

Attributes

SPMIIDR_EL1 is a 64-bit register.

Field descriptions

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
RES0
ProductIDVariantRevisionImplementer[10:7]RES0Implementer[6:0]

Bits [63:32]

Reserved, RES0.

ProductID, bits [31:20]

Part number, bits [11:0]. The part number is selected by the designer of the component.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Variant, bits [19:16]

Component major revision.

Defines either a variant of the component defined by SPMIIDR_EL1.ProductID, or the major revision of the component.

When defining a major revision, SPMIIDR_EL1.Variant and SPMIIDR_EL1.Revision together form the revision number of the component, with SPMIIDR_EL1.Variant being the most significant part and SPMIIDR_EL1.Revision the least significant part. When a component is changed, SPMIIDR_EL1.Variant or SPMIIDR_EL1.Revision is increased to ensure that software can differentiate the different revisions of the component. If SPMIIDR_EL1.Variant is increased then SPMIIDR_EL1.Revision should be set to 0b0000.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Revision, bits [15:12]

Component minor revision.

When a component is changed:

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Implementer, bits [11:8, 6:0]

JEDEC-assigned JEP106 identification code of the designer of the component.

SPMIIDR_EL1[11:8] is the JEP106 bank identifier minus 1 and SPMIIDR_EL1[6:0] is the JEP106 identification code for the designer of the component. The code identifies the designer of the component, which might not be not the same as the implementer of the device containing the component. To obtain a number, or to see the assignment of these codes, contact JEDEC http://www.jedec.org.

Note

For example, for a component designed by Arm Limited, the JEP106 bank is 5, and the JEP106 identification code is 0x3B, meaning SPMIIDR_EL1[11:0] has the value 0x43B.

Zero is not a valid JEP106 identification code, meaning a value of zero for SPMIIDR_EL1 indicates this register is not implemented.

This field has an IMPLEMENTATION DEFINED value.

The Implementer field is split as follows:

Access to this field is RO.

Bit [7]

Reserved, RES0.

Accessing SPMIIDR_EL1

To access SPMIIDR_EL1 for System PMU <s>, set SPMSELR_EL0.SYSPMUSEL to s.

SPMIIDR_EL1 reads-as-zero if any of the following are true:

Accesses to this register use the following encodings in the System register encoding space:

MRS <Xt>, SPMIIDR_EL1

op0op1CRnCRmop2
0b100b0000b10010b11010b100

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && MDCR_EL3.EnPM2 == '0' then UNDEFINED; elsif HaveEL(EL3) && EL3SDDUndefPriority() && SPMACCESSR_EL3<(UInt(SPMSELR_EL0.SYSPMUSEL) * 2) + 1:UInt(SPMSELR_EL0.SYSPMUSEL) * 2> == '00' then UNDEFINED; elsif EL2Enabled() && IsFeatureImplemented(FEAT_FGT2) && ((HaveEL(EL3) && SCR_EL3.FGTEn2 == '0') || HDFGRTR2_EL2.nSPMID == '0') then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && MDCR_EL2.EnSPM == '0' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && SPMACCESSR_EL2<(UInt(SPMSELR_EL0.SYSPMUSEL) * 2) + 1:UInt(SPMSELR_EL0.SYSPMUSEL) * 2> == '00' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && MDCR_EL3.EnPM2 == '0' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && SPMACCESSR_EL3<(UInt(SPMSELR_EL0.SYSPMUSEL) * 2) + 1:UInt(SPMSELR_EL0.SYSPMUSEL) * 2> == '00' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = SPMIIDR_EL1[UInt(SPMSELR_EL0.SYSPMUSEL)]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && MDCR_EL3.EnPM2 == '0' then UNDEFINED; elsif HaveEL(EL3) && EL3SDDUndefPriority() && SPMACCESSR_EL3<(UInt(SPMSELR_EL0.SYSPMUSEL) * 2) + 1:UInt(SPMSELR_EL0.SYSPMUSEL) * 2> == '00' then UNDEFINED; elsif HaveEL(EL3) && MDCR_EL3.EnPM2 == '0' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); elsif HaveEL(EL3) && SPMACCESSR_EL3<(UInt(SPMSELR_EL0.SYSPMUSEL) * 2) + 1:UInt(SPMSELR_EL0.SYSPMUSEL) * 2> == '00' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = SPMIIDR_EL1[UInt(SPMSELR_EL0.SYSPMUSEL)]; elsif PSTATE.EL == EL3 then X[t, 64] = SPMIIDR_EL1[UInt(SPMSELR_EL0.SYSPMUSEL)];


26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.