GICD_SETSPI_SR, Set Secure SPI Pending Register

The GICD_SETSPI_SR characteristics are:

Purpose

Adds the pending state to a valid SPI.

A write to this register changes the state of an inactive SPI to pending, and the state of an active SPI to active and pending.

Configuration

If GICD_TYPER.MBIS == 0, this register is reserved.

When GICD_CTLR.DS == 1, this register is WI.

Attributes

GICD_SETSPI_SR is a 32-bit register.

Field descriptions

313029282726252423222120191817161514131211109876543210
RES0INTID

Bits [31:13]

Reserved, RES0.

INTID, bits [12:0]

The INTID of the SPI.

Additional information

The function of this register depends on whether the targeted SPI is configured to be an edge-triggered or level-sensitive interrupt:

Accessing GICD_SETSPI_SR

Writes to this register have no effect if:

16-bit accesses to bits [15:0] of this register must be supported.

GICD_SETSPI_SR can be accessed through the memory-mapped interfaces:

ComponentFrameOffsetInstance
GIC DistributorDist_base0x0050GICD_SETSPI_SR

This interface is accessible as follows:


26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.