TRCRSR, Trace Resources Status Register

The TRCRSR characteristics are:

Purpose

Use this to set, or read, the status of the resources.

Configuration

External register TRCRSR bits [31:0] are architecturally mapped to AArch64 System register TRCRSR[31:0].

This register is present only when FEAT_ETE is implemented and FEAT_TRC_EXT is implemented. Otherwise, direct accesses to TRCRSR are RES0.

Attributes

TRCRSR is a 32-bit register.

Field descriptions

313029282726252423222120191817161514131211109876543210
RES0TAEVENT[3]EVENT[2]EVENT[1]EVENT[0]RES0EXTIN[3]EXTIN[2]EXTIN[1]EXTIN[0]

Bits [31:13]

Reserved, RES0.

TA, bit [12]

Tracing active.

TAMeaning
0b0

Tracing is not active.

0b1

Tracing is active.

The reset behavior of this field is:

EVENT[<m>], bit [m+8], for m = 3 to 0

Untraced status of ETEEvents.

EVENT[<m>]Meaning
0b0

An ETEEvent <m> has not occurred.

0b1

An ETEEvent <m> has occurred while the resources were in the Paused state.

The reset behavior of this field is:

Accessing this field has the following behavior:

Bits [7:4]

Reserved, RES0.

EXTIN[<m>], bit [m], for m = 3 to 0

The sticky status of the External Input Selectors.

EXTIN[<m>]Meaning
0b0

An event selected by External Input Selector <m> has not occurred.

0b1

At least one event selected by External Input Selector <m> has occurred while the resources were in the Paused state.

The reset behavior of this field is:

Accessing this field has the following behavior:

Accessing TRCRSR

Must always be programmed.

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

Reads from this register might return an UNKNOWN value if the trace unit is not in either of the Idle or Stable states.

TRCRSR can be accessed through the external debug interface:

ComponentOffsetInstance
ETE0x028TRCRSR

This interface is accessible as follows:


26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.