FPSCR, Floating-Point Status and Control Register

Negative condition flag. This is updated by floating-point comparison operations.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Zero condition flag. This is updated by floating-point comparison operations.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Carry condition flag. This is updated by floating-point comparison operations.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Overflow condition flag. This is updated by floating-point comparison operations.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Cumulative saturation bit, Advanced SIMD only. This bit is set to 1 to indicate that an Advanced SIMD integer operation has saturated since 0 was last written to this bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Alternative half-precision control bit:

AHP	Meaning
0b0	IEEE half-precision format selected.
0b1	Alternative half-precision format selected.

This bit is used only for conversions between half-precision floating-point and other floating-point formats.

The data-processing instructions added as part of the FEAT_FP16 extension always use the IEEE half-precision format, and ignore the value of this bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Default NaN mode control bit:

DN	Meaning
0b0	NaN operands propagate through to the output of a floating-point operation.
0b1	Any operation involving one or more NaNs returns the Default NaN.

The value of this bit controls only scalar floating-point arithmetic. Advanced SIMD arithmetic always uses the Default NaN setting, regardless of the value of the DN bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Flush-to-zero mode control bit:

FZ	Meaning
0b0	Flush-to-zero mode disabled. Behavior of the floating-point system is fully compliant with the IEEE 754 standard.
0b1	Flush-to-zero mode enabled.

The value of this bit controls only scalar floating-point arithmetic. Advanced SIMD arithmetic always uses the Flush-to-zero setting, regardless of the value of the FZ bit.

This bit has no effect on half-precision calculations.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Rounding Mode control field. The encoding of this field is:

RMode	Meaning
0b00	Round to Nearest (RN) mode.
0b01	Round towards Plus Infinity (RP) mode.
0b10	Round towards Minus Infinity (RM) mode.
0b11	Round towards Zero (RZ) mode.

The specified rounding mode is used by almost all scalar floating-point instructions. Advanced SIMD arithmetic always uses the Round to Nearest setting, regardless of the value of the RMode bits.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

If this field is RW and is set to a value other than zero, some floating-point instruction encodings are UNDEFINED. The instruction pseudocode identifies these instructions.

Arm strongly recommends that software never sets this field to a value other than zero.

The value of this field is ignored when processing Advanced SIMD instructions.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation implements FPSCR.LEN,STRIDE as RAZ, access to this field is RAZ/WI.

Flush-to-zero mode control bit on half-precision data-processing instructions:

FZ16	Meaning
0b0	Flush-to-zero mode disabled. Behavior of the floating-point system is fully compliant with the IEEE 754 standard.
0b1	Flush-to-zero mode enabled.

The value of this bit applies to both scalar and Advanced SIMD floating-point half-precision calculations.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Reserved, RES0.

If this field is RW and is set to a value other than zero, some floating-point instruction encodings are UNDEFINED. The instruction pseudocode identifies these instructions.

Arm strongly recommends that software never sets this field to a value other than zero.

The value of this field is ignored when processing Advanced SIMD instructions.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation implements FPSCR.LEN,STRIDE as RAZ, access to this field is RAZ/WI.

Input Denormal floating-point exception trap enable.

IDE	Meaning
0b0	Untrapped exception handling selected. If the floating-point exception occurs, the IDC bit is set to 1.
0b1	Trapped exception handling selected. If the floating-point exception occurs, the PE does not update the IDC bit.

When this bit is RW, it applies only to floating-point operations. Advanced SIMD operations always use untrapped floating-point exception handling in AArch32 state.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation does not implement trapping of Input Denormal floating-point exceptions, access to this field is RAZ/WI.

Reserved, RES0.

Inexact floating-point exception trap enable.

IXE	Meaning
0b0	Untrapped exception handling selected. If the floating-point exception occurs, the IXC bit is set to 1.
0b1	Trapped exception handling selected. If the floating-point exception occurs, the PE does not update the IXC bit.

When this bit is RW, it applies only to floating-point operations. Advanced SIMD operations always use untrapped floating-point exception handling in AArch32 state.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation does not implement trapping of Inexact floating-point exceptions, access to this field is RAZ/WI.

Underflow floating-point exception trap enable.

UFE	Meaning
0b0	Untrapped exception handling selected. If the floating-point exception occurs, the UFC bit is set to 1.
0b1	Trapped exception handling selected. If the floating-point exception occurs and Flush-to-zero is not enabled, the PE does not update the UFC bit.

When this bit is RW, it applies only to floating-point operations. Advanced SIMD operations always use untrapped floating-point exception handling in AArch32 state.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation does not implement trapping of Underflow floating-point exceptions, access to this field is RAZ/WI.

Overflow floating-point exception trap enable.

OFE	Meaning
0b0	Untrapped exception handling selected. If the floating-point exception occurs, the OFC bit is set to 1.
0b1	Trapped exception handling selected. If the floating-point exception occurs, the PE does not update the OFC bit.

When this bit is RW, it applies only to floating-point operations. Advanced SIMD operations always use untrapped floating-point exception handling in AArch32 state.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation does not implement trapping of Overflow floating-point exceptions, access to this field is RAZ/WI.

Divide by Zero floating-point exception trap enable.

DZE	Meaning
0b0	Untrapped exception handling selected. If the floating-point exception occurs, the DZC bit is set to 1.
0b1	Trapped exception handling selected. If the floating-point exception occurs, the PE does not update the DZC bit.

When this bit is RW, it applies only to floating-point operations. Advanced SIMD operations always use untrapped floating-point exception handling in AArch32 state.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation does not implement trapping of Divide by Zero floating-point exceptions, access to this field is RAZ/WI.

Invalid Operation floating-point exception trap enable.

IOE	Meaning
0b0	Untrapped exception handling selected. If the floating-point exception occurs, the IOC bit is set to 1.
0b1	Trapped exception handling selected. If the floating-point exception occurs, the PE does not update the IOC bit.

When this bit is RW, it applies only to floating-point operations. Advanced SIMD operations always use untrapped floating-point exception handling in AArch32 state.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

When an implementation does not implement trapping of Invalid Operation floating-point exceptions, access to this field is RAZ/WI.

Input Denormal cumulative floating-point exception bit. This bit is set to 1 to indicate that the Input Denormal floating-point exception has occurred since 0 was last written to this bit.

How VFP instructions update this bit depends on the value of the IDE bit.

Advanced SIMD instructions set this bit if the Input Denormal floating-point exception occurs in one or more of the floating-point calculations performed by the instruction, regardless of the value of the IDE bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Reserved, RES0.

Inexact cumulative floating-point exception bit. This bit is set to 1 to indicate that the Inexact floating-point exception has occurred since 0 was last written to this bit.

How VFP instructions update this bit depends on the value of the IXE bit.

Advanced SIMD instructions set this bit if the Inexact floating-point exception occurs in one or more of the floating-point calculations performed by the instruction, regardless of the value of the IXE bit.

The criteria for the Inexact floating-point exception to occur are different in Flush-to-zero mode. For more information, see 'Flush-to-zero'.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Underflow cumulative floating-point exception bit. This bit is set to 1 to indicate that the Underflow floating-point exception has occurred since 0 was last written to this bit.

How VFP instructions update this bit depends on the value of the UFE bit.

Advanced SIMD instructions set this bit if the Underflow floating-point exception occurs in one or more of the floating-point calculations performed by the instruction, if FPSCR.UFE is 0 or if Flush-to-zero is enabled.

The criteria for the Underflow floating-point exception to occur are different in Flush-to-zero mode. For more information, see 'Flush-to-zero'.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Overflow cumulative floating-point exception bit. This bit is set to 1 to indicate that the Overflow floating-point exception has occurred since 0 was last written to this bit.

How VFP instructions update this bit depends on the value of the OFE bit.

Advanced SIMD instructions set this bit if the Overflow floating-point exception occurs in one or more of the floating-point calculations performed by the instruction, regardless of the value of the OFE bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Divide by Zero cumulative floating-point exception bit. This bit is set to 1 to indicate that the Divide by Zero floating-point exception has occurred since 0 was last written to this bit.

How VFP instructions update this bit depends on the value of the DZE bit.

Advanced SIMD instructions set this bit if the Divide by Zero floating-point exception occurs in one or more of the floating-point calculations performed by the instruction, regardless of the value of the DZE bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.

Invalid Operation cumulative floating-point exception bit. This bit is set to 1 to indicate that the Invalid Operation floating-point exception has occurred since 0 was last written to this bit.

How VFP instructions update this bit depends on the value of the IOE bit.

Advanced SIMD instructions set this bit if the Invalid Operation floating-point exception occurs in one or more of the floating-point calculations performed by the instruction, regardless of the value of the IOE bit.

The reset behavior of this field is:

• On a Warm reset, this field resets to an architecturally UNKNOWN value.