The MAIR1 characteristics are:
Along with MAIR0, provides the memory attribute encodings corresponding to the possible AttrIndx values in a Long-descriptor format translation table entry for stage 1 translations.
AttrIndx[2] indicates the MAIR register to be used:
This register is banked between MAIR1 and MAIR1_S and MAIR1_NS.
AArch32 System register MAIR1 bits [31:0] are architecturally mapped to AArch64 System register MAIR_EL1[63:32] when EL3 is not implemented or EL3 is using AArch64.
AArch32 System register MAIR1 bits [31:0] are architecturally mapped to AArch32 System register NMRR[31:0] when EL3 is not implemented or EL3 is using AArch64.
AArch32 System register MAIR1 bits [31:0] (MAIR1_NS) are architecturally mapped to AArch32 System register NMRR[31:0] (NMRR_NS) when EL3 is using AArch32.
AArch32 System register MAIR1 bits [31:0] (MAIR1_S) are architecturally mapped to AArch32 System register NMRR[31:0] (NMRR_S) when EL3 is using AArch32.
This register is present only when EL1 is capable of using AArch32. Otherwise, direct accesses to MAIR1 are UNDEFINED.
MAIR1 and NMRR are the same register, with a different view depending on the value of TTBCR.EAE:
When EL3 is using AArch32, write access to MAIR1(S) is disabled when the CP15SDISABLE signal is asserted HIGH.
MAIR1 is a 32-bit register.
This register has the following instances:
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Attr7 | Attr6 | Attr5 | Attr4 | ||||||||||||||||||||||||||||
The memory attribute encoding for an AttrIndx[2:0] entry in a Long descriptor format translation table entry, where:
Bits [7:4] are encoded as follows:
| Attr<n>[7:4] | Meaning |
|---|---|
| 0b0000 | Device memory. See encoding of Attr<n>[3:0] for the type of Device memory. |
| 0b00RW, RW not 0b00 | Normal memory, Outer Write-Through Transient. |
| 0b0100 | Normal memory, Outer Non-cacheable. |
| 0b01RW, RW not 0b00 | Normal memory, Outer Write-Back Transient. |
| 0b10RW | Normal memory, Outer Write-Through Non-transient. |
| 0b11RW | Normal memory, Outer Write-Back Non-transient. |
R = Outer Read-Allocate policy, W = Outer Write-Allocate policy.
The meaning of bits [3:0] depends on the value of bits [7:4]:
| Attr<n>[3:0] | Meaning when Attr<n>[7:4] is 0b0000 | Meaning when Attr<n>[7:4] is not 0b0000 |
|---|---|---|
| 0b0000 | Device-nGnRnE memory | UNPREDICTABLE |
| 0b00RW, RW not 0b00 | UNPREDICTABLE | Normal memory, Inner Write-Through Transient |
| 0b0100 | Device-nGnRE memory | Normal memory, Inner Non-cacheable |
| 0b01RW, RW not 0b00 | UNPREDICTABLE | Normal memory, Inner Write-Back Transient |
| 0b1000 | Device-nGRE memory | Normal memory, Inner Write-Through Non-transient (RW=0b00) |
| 0b10RW, RW not 0b00 | UNPREDICTABLE | Normal memory, Inner Write-Through Non-transient |
| 0b1100 | Device-GRE memory | Normal memory, Inner Write-Back Non-transient (RW=0b00) |
| 0b11RW, RW not 0b00 | UNPREDICTABLE | Normal memory, Inner Write-Back Non-transient |
R = Inner Read-Allocate policy, W = Inner Write-Allocate policy.
The R and W bits in some Attr<n> fields have the following meanings:
| R or W | Meaning |
|---|---|
| 0b0 | No Allocate |
| 0b1 | Allocate |
When FEAT_XS is implemented, stage 1 Inner Write-Back Cacheable, Outer Write-Back Cacheable memory types have the XS attribute set to 0.
The reset behavior of this field is:
Accesses to this register use the following encodings in the System register encoding space:
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b1010 | 0b0010 | 0b001 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T10 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T10 == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TRVM == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HCR.TRVM == '1' then AArch32.TakeHypTrapException(0x03); elsif HaveEL(EL3) && ELUsingAArch32(EL3) then if TTBCR.EAE == '1' then R[t] = MAIR1_NS; else R[t] = NMRR_NS; else if TTBCR.EAE == '1' then R[t] = MAIR1; else R[t] = NMRR; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && ELUsingAArch32(EL3) then if TTBCR.EAE == '1' then R[t] = MAIR1_NS; else R[t] = NMRR_NS; else if TTBCR.EAE == '1' then R[t] = MAIR1; else R[t] = NMRR; elsif PSTATE.EL == EL3 then if TTBCR.EAE == '1' then if SCR.NS == '0' then R[t] = MAIR1_S; else R[t] = MAIR1_NS; else if SCR.NS == '0' then R[t] = NMRR_S; else R[t] = NMRR_NS;
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b1010 | 0b0010 | 0b001 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T10 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T10 == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TVM == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HCR.TVM == '1' then AArch32.TakeHypTrapException(0x03); elsif HaveEL(EL3) && ELUsingAArch32(EL3) then if TTBCR.EAE == '1' then MAIR1_NS = R[t]; else NMRR_NS = R[t]; else if TTBCR.EAE == '1' then MAIR1 = R[t]; else NMRR = R[t]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && ELUsingAArch32(EL3) then if TTBCR.EAE == '1' then MAIR1_NS = R[t]; else NMRR_NS = R[t]; else if TTBCR.EAE == '1' then MAIR1 = R[t]; else NMRR = R[t]; elsif PSTATE.EL == EL3 then if SCR.NS == '0' && CP15SDISABLE == Signal_High then UNDEFINED; elsif SCR.NS == '0' && CP15SDISABLE2 == Signal_High then UNDEFINED; else if TTBCR.EAE == '1' then if SCR.NS == '0' then MAIR1_S = R[t]; else MAIR1_NS = R[t]; else if SCR.NS == '0' then NMRR_S = R[t]; else NMRR_NS = R[t];
26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.