ICC_PMR_EL1, Interrupt Controller Interrupt Priority Mask Register

The ICC_PMR_EL1 characteristics are:

Purpose

Provides an interrupt priority filter. Only interrupts with a higher priority than the value in this register are signaled to the PE.

Writes to this register must be high performance and must ensure that no interrupt of lower priority than the written value occurs after the write, without requiring an ISB or an exception boundary.

Configuration

AArch64 System register ICC_PMR_EL1 bits [31:0] are architecturally mapped to AArch32 System register ICC_PMR[31:0].

This register is present only when GICv3 is implemented. Otherwise, direct accesses to ICC_PMR_EL1 are UNDEFINED.

To allow software to ensure appropriate observability of actions initiated by GIC register accesses, the PE and CPU interface logic must ensure that writes to this register are self-synchronising. This ensures that no interrupts below the written PMR value will be taken after a write to this register is architecturally executed. For more information, see 'Observability of the effects of accesses to the GIC registers' in ARM® Generic Interrupt Controller Architecture Specification, GIC architecture version 3.0 and version 4.0 (ARM IHI 0069).

Attributes

ICC_PMR_EL1 is a 64-bit register.

Field descriptions

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
RES0
RES0Priority

Bits [63:8]

Reserved, RES0.

Priority, bits [7:0]

The priority mask level for the CPU interface. If the priority of an interrupt is higher than the value indicated by this field, the interface signals the interrupt to the PE.

The possible priority field values are as follows:

Implemented priority bitsPossible priority field valuesNumber of priority levels
[7:0]0x00-0xFF (0-255), all values256
[7:1]0x00-0xFE (0-254), even values only128
[7:2]0x00-0xFC (0-252), in steps of 464
[7:3]0x00-0xF8 (0-248), in steps of 832
[7:4]0x00-0xF0 (0-240), in steps of 1616

Unimplemented priority bits are RAZ/WI.

The reset behavior of this field is:

Accessing ICC_PMR_EL1

Accesses to this register use the following encodings in the System register encoding space:

MRS <Xt>, ICC_PMR_EL1

op0op1CRnCRmop2
0b110b0000b01000b01100b000

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && SCR_EL3.<IRQ,FIQ> == '11' then UNDEFINED; elsif ICC_SRE_EL1.SRE == '0' then AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && ICH_HCR_EL2.TC == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.FMO == '1' then X[t, 64] = ICV_PMR_EL1; elsif EL2Enabled() && HCR_EL2.IMO == '1' then X[t, 64] = ICV_PMR_EL1; elsif HaveEL(EL3) && SCR_EL3.<IRQ,FIQ> == '11' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = ICC_PMR_EL1; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && SCR_EL3.<IRQ,FIQ> == '11' then UNDEFINED; elsif ICC_SRE_EL2.SRE == '0' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && SCR_EL3.<IRQ,FIQ> == '11' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = ICC_PMR_EL1; elsif PSTATE.EL == EL3 then if ICC_SRE_EL3.SRE == '0' then AArch64.SystemAccessTrap(EL3, 0x18); else X[t, 64] = ICC_PMR_EL1;

MSR ICC_PMR_EL1, <Xt>

op0op1CRnCRmop2
0b110b0000b01000b01100b000

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && SCR_EL3.<IRQ,FIQ> == '11' then UNDEFINED; elsif ICC_SRE_EL1.SRE == '0' then AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && ICH_HCR_EL2.TC == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.FMO == '1' then ICV_PMR_EL1 = X[t, 64]; elsif EL2Enabled() && HCR_EL2.IMO == '1' then ICV_PMR_EL1 = X[t, 64]; elsif HaveEL(EL3) && SCR_EL3.<IRQ,FIQ> == '11' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else ICC_PMR_EL1 = X[t, 64]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && SCR_EL3.<IRQ,FIQ> == '11' then UNDEFINED; elsif ICC_SRE_EL2.SRE == '0' then AArch64.SystemAccessTrap(EL2, 0x18); elsif HaveEL(EL3) && SCR_EL3.<IRQ,FIQ> == '11' then if EL3SDDUndef() then UNDEFINED; else AArch64.SystemAccessTrap(EL3, 0x18); else ICC_PMR_EL1 = X[t, 64]; elsif PSTATE.EL == EL3 then if ICC_SRE_EL3.SRE == '0' then AArch64.SystemAccessTrap(EL3, 0x18); else ICC_PMR_EL1 = X[t, 64];


26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.