The ID_AA64ISAR1_EL1 characteristics are:
Provides information about the features and instructions implemented in AArch64 state.
For general information about the interpretation of the ID registers, see 'Principles of the ID scheme for fields in ID registers'.
There are no configuration notes.
ID_AA64ISAR1_EL1 is a 64-bit register.
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| LS64 | XS | I8MM | DGH | BF16 | SPECRES | SB | FRINTTS | ||||||||||||||||||||||||
| GPI | GPA | LRCPC | FCMA | JSCVT | API | APA | DPB | ||||||||||||||||||||||||
Indicates support for LD64B and ST64B* instructions, and the ACCDATA_EL1 register.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| LS64 | Meaning |
|---|---|
| 0b0000 |
The LD64B, ST64B, ST64BV, and ST64BV0 instructions, the ACCDATA_EL1 register, and associated traps are not supported. |
| 0b0001 |
The LD64B and ST64B instructions are supported. |
| 0b0010 |
The LD64B, ST64B, and ST64BV instructions, and their associated traps are supported. |
| 0b0011 |
The LD64B, ST64B, ST64BV, and ST64BV0 instructions, the ACCDATA_EL1 register, and their associated traps are supported. |
All other values are reserved.
FEAT_LS64 implements the functionality identified by 0b0001.
FEAT_LS64_V implements the functionality identified by 0b0010.
FEAT_LS64_ACCDATA implements the functionality identified by 0b0011.
From Armv8.7, the permitted values are 0b0000, 0b0001, 0b0010, and 0b0011.
Access to this field is RO.
Indicates support for the XS attribute, the TLBI and DSB instructions with the nXS qualifier, and the HCRX_EL2.{FGTnXS, FnXS} fields in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| XS | Meaning |
|---|---|
| 0b0000 |
The XS attribute, the TLBI and DSB instructions with the nXS qualifier, and the HCRX_EL2.{FGTnXS, FnXS} fields are not supported. |
| 0b0001 |
The XS attribute, the TLBI and DSB instructions with the nXS qualifier, and the HCRX_EL2.{FGTnXS, FnXS} fields are supported. |
All other values are reserved.
FEAT_XS implements the functionality identified by 0b0001.
From Armv8.7, the value 0b0000 is not permitted.
Access to this field is RO.
Indicates support for the following Advanced SIMD Int8 matrix multiplication instructions SMMLA, SUDOT, UMMLA, USMMLA, and USDOT in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| I8MM | Meaning |
|---|---|
| 0b0000 |
Int8 matrix multiplication instructions are not implemented. |
| 0b0001 |
The specified instructions are implemented. |
All other values are reserved.
FEAT_I8MM implements the functionality identified by 0b0001.
When Advanced SIMD and SVE are both implemented, this field must return the same value as ID_AA64ZFR0_EL1.I8MM.
From Armv8.6, the value 0b0000 is not permitted.
Access to this field is RO.
Indicates support for the Data Gathering Hint instruction.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| DGH | Meaning |
|---|---|
| 0b0000 |
Data Gathering Hint is not implemented. |
| 0b0001 |
Data Gathering Hint is implemented. |
All other values are reserved.
FEAT_DGH implements the functionality identified by 0b0001.
From Armv8.0, the permitted values are 0b0000 and 0b0001.
If the DGH instruction has no effect in preventing the merging of memory accesses, the value of this field is 0b0000.
Access to this field is RO.
Indicates support for Advanced SIMD and floating-point BFloat16 instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| BF16 | Meaning |
|---|---|
| 0b0000 |
BFloat16 instructions are not implemented. |
| 0b0001 |
BFCVT, BFCVTN, BFCVTN2, BFDOT, BFMLALB, BFMLALT, and BFMMLA instructions are implemented. |
| 0b0010 |
As 0b0001, but the FPCR.EBF field is also supported. |
All other values are reserved.
FEAT_BF16 adds the functionality identified by 0b0001.
FEAT_EBF16 adds the functionality identified by 0b0010.
When FEAT_SVE or FEAT_SME is implemented, this field must return the same value as ID_AA64ZFR0_EL1.BF16.
From Armv8.6 and Armv9.1, the value 0b0000 is not permitted.
Access to this field is RO.
Indicates support for prediction invalidation instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SPECRES | Meaning |
|---|---|
| 0b0000 |
Prediction invalidation instructions are not implemented. |
| 0b0001 |
CFP RCTX, DVP RCTX and CPP RCTX instructions are implemented. |
| 0b0010 |
As 0b0001, and COSP RCTX instruction is implemented. |
All other values are reserved.
FEAT_SPECRES implements the functionality identified by 0b0001.
FEAT_SPECRES2 implements the functionality identified by 0b0010.
From Armv8.5, the value 0b0000 is not permitted.
From Armv8.9, the value 0b0001 is not permitted.
Access to this field is RO.
Indicates support for SB instruction in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| SB | Meaning |
|---|---|
| 0b0000 |
SB instruction is not implemented. |
| 0b0001 |
SB instruction is implemented. |
All other values are reserved.
FEAT_SB implements the functionality identified by 0b0001.
From Armv8.5, the value 0b0000 is not permitted.
Access to this field is RO.
Indicates support for FRINT32Z, FRINT32X, FRINT64Z, and FRINT64X instructions.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| FRINTTS | Meaning |
|---|---|
| 0b0000 |
The specified instructions are not implemented. |
| 0b0001 |
The specified instructions are implemented. |
All other values are reserved.
FEAT_FRINTTS implements the functionality identified by 0b0001.
From Armv8.5, the value 0b0000 is not permitted.
Access to this field is RO.
Indicates support for an IMPLEMENTATION DEFINED algorithm is implemented in the PE for generic code authentication in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| GPI | Meaning |
|---|---|
| 0b0000 |
Generic Authentication using an IMPLEMENTATION DEFINED algorithm is not implemented. |
| 0b0001 |
Generic Authentication using an IMPLEMENTATION DEFINED algorithm is implemented. This includes the PACGA instruction. |
All other values are reserved.
FEAT_PACIMP implements the functionality identified by 0b0001.
From Armv8.3, the permitted values are 0b0000 and 0b0001.
If the value of ID_AA64ISAR1_EL1.GPA is nonzero, or the value of ID_AA64ISAR2_EL1.GPA3 is nonzero, this field must have the value 0b0000.
Access to this field is RO.
Indicates whether the QARMA5 algorithm is implemented in the PE for generic code authentication in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| GPA | Meaning |
|---|---|
| 0b0000 |
Generic Authentication using the QARMA5 algorithm is not implemented. |
| 0b0001 |
Generic Authentication using the QARMA5 algorithm is implemented. This includes the PACGA instruction. |
All other values are reserved.
FEAT_PACQARMA5 implements the functionality identified by 0b0001.
From Armv8.3, the permitted values are 0b0000 and 0b0001.
If the value of ID_AA64ISAR1_EL1.GPI is nonzero, or the value of ID_AA64ISAR2_EL1.GPA3 is nonzero, this field must have the value 0b0000.
Access to this field is RO.
Indicates support for weaker release consistency, RCpc, based model.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| LRCPC | Meaning |
|---|---|
| 0b0000 |
RCpc instructions are not implemented. |
| 0b0001 |
The no offset LDAPR, LDAPRB, and LDAPRH instructions are implemented. |
| 0b0010 |
As 0b0001, and the LDAPR (unscaled immediate) and STLR (unscaled immediate) instructions are implemented. |
| 0b0011 | As 0b0010, and the post-index LDAPR, LDIAPP, STILP, and pre-index STLR instructions are implemented. If Advanced SIMD and floating-point is implemented, then the LDAPUR (SIMD&FP), LDAP1 (SIMD&FP), STLUR (SIMD&FP), and STL1 (SIMD&FP) instructions are implemented in Advanced SIMD and floating-point. |
All other values are reserved.
FEAT_LRCPC implements the functionality identified by the value 0b0001.
FEAT_LRCPC2 implements the functionality identified by the value 0b0010.
FEAT_LRCPC3 implements the functionality identified by the value 0b0011.
From Armv8.3, the value 0b0000 is not permitted.
From Armv8.4, the value 0b0001 is not permitted.
Access to this field is RO.
Indicates support for complex number addition and multiplication, where numbers are stored in vectors.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| FCMA | Meaning |
|---|---|
| 0b0000 |
The FCMLA and FCADD instructions are not implemented. |
| 0b0001 |
The FCMLA and FCADD instructions are implemented. |
All other values are reserved.
FEAT_FCMA implements the functionality identified by the value 0b0001.
From Armv8.3, if Advanced SIMD or floating-point is implemented, the value 0b0000 is not permitted.
From Armv8.3, if Advanced SIMD or floating-point is not implemented, the only permitted value is 0b0000.
Access to this field is RO.
Indicates support for JavaScript conversion from double precision floating-point values to integers in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| JSCVT | Meaning |
|---|---|
| 0b0000 |
The FJCVTZS instruction is not implemented. |
| 0b0001 |
The FJCVTZS instruction is implemented. |
All other values are reserved.
FEAT_JSCVT implements the functionality identified by 0b0001.
From Armv8.3, if Advanced SIMD or floating-point is implemented, the value 0b0000 is not permitted.
From Armv8.3, if Advanced SIMD or floating-point is not implemented, the only permitted value is 0b0000.
Access to this field is RO.
Indicates whether an IMPLEMENTATION DEFINED algorithm is implemented in the PE for address authentication, in AArch64 state. This applies to all Pointer Authentication instructions other than the PACGA instruction.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| API | Meaning |
|---|---|
| 0b0000 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is not implemented. |
| 0b0001 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is implemented, FEAT_EPAC and FEAT_PAuth2 are not implemented. |
| 0b0010 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is implemented, FEAT_EPAC is implemented, and FEAT_PAuth2 is not implemented. |
| 0b0011 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is implemented, FEAT_EPAC is not implemented, and FEAT_PAuth2 is implemented. |
| 0b0100 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is implemented, FEAT_EPAC is not implemented, FEAT_PAuth2 and FEAT_FPAC are implemented. |
| 0b0101 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is implemented, FEAT_EPAC is not implemented, FEAT_PAuth2, FEAT_FPAC, and FEAT_FPACCOMBINE are implemented. |
| 0b0110 |
Address Authentication using an IMPLEMENTATION DEFINED algorithm is implemented, including instructions that allow signing of LR using SP and PC as diversifiers, FEAT_EPAC is not implemented, FEAT_PAuth2, FEAT_FPAC, FEAT_FPACCOMBINE, and FEAT_PAuth_LR are implemented. |
All other values are reserved.
FEAT_PAuth implements the functionality identified by 0b0001.
FEAT_EPAC implements the functionality identified by 0b0010.
FEAT_PAuth2 implements the functionality identified by 0b0011.
FEAT_FPAC implements the functionality identified by 0b0100.
FEAT_FPACCOMBINE implements the functionality identified by 0b0101.
FEAT_PAuth_LR implements the functionality identified by 0b0110.
When this field is nonzero, FEAT_PACIMP is implemented.
In Armv8.3, the permitted values are 0b0001, 0b0010, 0b0011, 0b0100, and 0b0101.
From Armv8.6, the permitted values are 0b0011, 0b0100, and 0b0101.
From Armv9.5, the permitted values are 0b0011, 0b0100, 0b0101, and 0b0110.
If the value of ID_AA64ISAR1_EL1.APA is nonzero, or the value of ID_AA64ISAR2_EL1.APA3 is nonzero, this field must have the value 0b0000.
Access to this field is RO.
Indicates whether the QARMA5 algorithm is implemented in the PE for address authentication, in AArch64 state. This applies to all Pointer Authentication instructions other than the PACGA instruction.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| APA | Meaning |
|---|---|
| 0b0000 |
Address Authentication using the QARMA5 algorithm is not implemented. |
| 0b0001 |
Address Authentication using the QARMA5 algorithm is implemented, FEAT_EPAC and FEAT_PAuth2 are not implemented. |
| 0b0010 |
Address Authentication using the QARMA5 algorithm is implemented, FEAT_EPAC is implemented, and FEAT_PAuth2 is not implemented. |
| 0b0011 |
Address Authentication using the QARMA5 algorithm is implemented, FEAT_EPAC is not implemented, and FEAT_PAuth2 is implemented. |
| 0b0100 |
Address Authentication using the QARMA5 algorithm is implemented, FEAT_EPAC is not implemented, FEAT_PAuth2 and FEAT_FPAC are implemented. |
| 0b0101 |
Address Authentication using the QARMA5 algorithm is implemented, FEAT_EPAC is not implemented, FEAT_PAuth2, FEAT_FPAC, and FEAT_FPACCOMBINE are implemented. |
| 0b0110 |
Address Authentication using the QARMA5 algorithm is implemented, including instructions that allow signing of LR using SP and PC as diversifiers, FEAT_EPAC is not implemented, FEAT_PAuth2, FEAT_FPAC, FEAT_FPACCOMBINE, and FEAT_PAuth_LR are implemented. |
All other values are reserved.
FEAT_PAuth implements the functionality identified by 0b0001.
FEAT_EPAC implements the functionality identified by 0b0010.
FEAT_PAuth2 implements the functionality identified by 0b0011.
FEAT_FPAC implements the functionality identified by 0b0100.
FEAT_FPACCOMBINE implements the functionality identified by 0b0101.
FEAT_PAuth_LR implements the functionality identified by 0b0110.
When this field is nonzero, FEAT_PACQARMA5 is implemented.
In Armv8.3, the permitted values are 0b0001, 0b0010, 0b0011, 0b0100, and 0b0101.
From Armv8.6, the permitted values are 0b0011, 0b0100, and 0b0101.
From Armv9.5, the permitted values are 0b0011, 0b0100, 0b0101, and 0b0110.
If the value of ID_AA64ISAR1_EL1.API is nonzero, or the value of ID_AA64ISAR2_EL1.APA3 is nonzero, this field must have the value 0b0000.
Access to this field is RO.
Data Persistence writeback. Indicates support for the DC CVAP and DC CVADP instructions in AArch64 state.
The value of this field is an IMPLEMENTATION DEFINED choice of:
| DPB | Meaning |
|---|---|
| 0b0000 |
DC CVAP not supported. |
| 0b0001 |
DC CVAP supported. |
| 0b0010 |
All other values are reserved.
FEAT_DPB implements the functionality identified by the value 0b0001.
FEAT_DPB2 implements the functionality identified by the value 0b0010.
From Armv8.2, the value 0b0000 is not permitted.
From Armv8.5, the value 0b0001 is not permitted.
Access to this field is RO.
Accesses to this register use the following encodings in the System register encoding space:
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b11 | 0b000 | 0b0000 | 0b0110 | 0b001 |
if PSTATE.EL == EL0 then if IsFeatureImplemented(FEAT_IDST) then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); else UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && HCR_EL2.TID3 == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else X[t, 64] = ID_AA64ISAR1_EL1; elsif PSTATE.EL == EL2 then X[t, 64] = ID_AA64ISAR1_EL1; elsif PSTATE.EL == EL3 then X[t, 64] = ID_AA64ISAR1_EL1;
26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.