IFSR32

Allows access to the AArch32 IFSR register from AArch64 state only. Its value has no effect on execution in AArch64 state.

Configuration

AArch64 System register IFSR32_EL2 bits [31:0] are architecturally mapped to AArch32 System register IFSR[31:0].

This register is present only when EL1 is capable of using AArch32. Otherwise, direct accesses to IFSR32_EL2 are UNDEFINED.

If EL2 is not implemented but EL3 is implemented, and EL1 is capable of using AArch32, then this register is not RES0.

Attributes

Field descriptions

When TTBCR.EAE == 0:

Bits [63:17]

FnV, bit [16]

FAR not Valid, for a synchronous External abort other than a synchronous External abort on a translation table walk.

FnV	Meaning
0b0	IFAR is valid.
0b1	IFAR is not valid, and holds an UNKNOWN value.

This field is valid only for a synchronous External abort other than a synchronous External abort on a translation table walk. It is RES0 for all other Prefetch Abort exceptions.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bits [15:13]

ExT, bit [12]

External abort type. This bit can be used to provide an IMPLEMENTATION DEFINED classification of External aborts.

In an implementation that does not provide any classification of External aborts, this bit is RES0.

For aborts other than External aborts this bit always returns 0.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bit [11]

FS, bits [10, 3:0]

Fault Status bits. Bits [10] and [3:0] are interpreted together.

FS	Meaning	Applies when
0b00001	PC alignment fault.
0b00010	Debug exception.
0b00011	Access flag fault, level 1.
0b00101	Translation fault, level 1.
0b00110	Access flag fault, level 2.
0b00111	Translation fault, level 2.
0b01000	Synchronous External abort, not on translation table walk.
0b01001	Domain fault, level 1.
0b01011	Domain fault, level 2.
0b01100	Synchronous External abort, on translation table walk, level 1.
0b01101	Permission fault, level 1.
0b01110	Synchronous External abort, on translation table walk, level 2.
0b01111	Permission fault, level 2.
0b10000	TLB conflict abort.
0b10100	IMPLEMENTATION DEFINED fault (Lockdown fault).
0b11001	Synchronous parity or ECC error on memory access, not on translation table walk.	When FEAT_RAS is not implemented
0b11100	Synchronous parity or ECC error on translation table walk, level 1.	When FEAT_RAS is not implemented
0b11110	Synchronous parity or ECC error on translation table walk, level 2.	When FEAT_RAS is not implemented

All other values are reserved.

For more information about the lookup level associated with a fault, see 'The level associated with MMU faults on a Short-descriptor translation table lookup'.

The FS field is split as follows:

FS[4] is IFSR32_EL2[10].
FS[3:0] is IFSR32_EL2[3:0].

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

LPAE, bit [9]

On taking a Data Abort exception, this bit is set as follows:

LPAE	Meaning
0b0	Using the Short-descriptor translation table formats.
0b1	Using the Long-descriptor translation table formats.

Hardware does not interpret this bit to determine the behavior of the memory system, and therefore software can set this bit to 0 or 1 without affecting operation.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bits [8:4]

When TTBCR.EAE == 1:

Bits [63:17]

FnV, bit [16]

FAR not Valid, for a synchronous External abort other than a synchronous External abort on a translation table walk.

FnV	Meaning
0b0	IFAR is valid.
0b1	IFAR is not valid, and holds an UNKNOWN value.

This field is valid only for a synchronous External abort other than a synchronous External abort on a translation table walk. It is RES0 for all other Prefetch Abort exceptions.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bits [15:13]

ExT, bit [12]

External abort type. This bit can be used to provide an IMPLEMENTATION DEFINED classification of External aborts.

In an implementation that does not provide any classification of External aborts, this bit is RES0.

For aborts other than External aborts this bit always returns 0.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bits [11:10]

LPAE, bit [9]

On taking a Data Abort exception, this bit is set as follows:

LPAE	Meaning
0b0	Using the Short-descriptor translation table formats.
0b1	Using the Long-descriptor translation table formats.

Hardware does not interpret this bit to determine the behavior of the memory system, and therefore software can set this bit to 0 or 1 without affecting operation.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Bits [8:6]

STATUS, bits [5:0]

Fault status bits. Possible values of this field are:

STATUS	Meaning	Applies when
0b000000	Address size fault in translation table base register.
0b000001	Address size fault, level 1.
0b000010	Address size fault, level 2.
0b000011	Address size fault, level 3.
0b000101	Translation fault, level 1.
0b000110	Translation fault, level 2.
0b000111	Translation fault, level 3.
0b001001	Access flag fault, level 1.
0b001010	Access flag fault, level 2.
0b001011	Access flag fault, level 3.
0b001101	Permission fault, level 1.
0b001110	Permission fault, level 2.
0b001111	Permission fault, level 3.
0b010000	Synchronous External abort, not on translation table walk.
0b010101	Synchronous External abort on translation table walk, level 1.
0b010110	Synchronous External abort on translation table walk, level 2.
0b010111	Synchronous External abort on translation table walk, level 3.
0b011000	Synchronous parity or ECC error on memory access, not on translation table walk.	When FEAT_RAS is not implemented
0b011101	Synchronous parity or ECC error on memory access on translation table walk, level 1.	When FEAT_RAS is not implemented
0b011110	Synchronous parity or ECC error on memory access on translation table walk, level 2.	When FEAT_RAS is not implemented
0b011111	Synchronous parity or ECC error on memory access on translation table walk, level 3.	When FEAT_RAS is not implemented
0b100001	PC alignment fault.
0b100010	Debug exception.
0b110000	TLB conflict abort.

All other values are reserved.

When FEAT_RAS is implemented, 0b011000, 0b011101, 0b011110, and 0b011111 are reserved.

For more information about the lookup level associated with a fault, see 'The level associated with MMU faults on a Long-descriptor translation table lookup'.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Accessing IFSR32_EL2

Accesses to this register use the following encodings in the System register encoding space:

MRS <Xt>, IFSR32_EL2

op0	op1	CRn	CRm	op2
0b11	0b100	0b0101	0b0000	0b001

if !HaveAArch32EL(EL1) then UNDEFINED; elsif PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EffectiveHCR_EL2_NVx() IN {'xx1'} then AArch64.SystemAccessTrap(EL2, 0x18); else UNDEFINED; elsif PSTATE.EL == EL2 then X[t, 64] = IFSR32_EL2; elsif PSTATE.EL == EL3 then X[t, 64] = IFSR32_EL2;

MSR IFSR32_EL2, <Xt>

op0	op1	CRn	CRm	op2
0b11	0b100	0b0101	0b0000	0b001

if !HaveAArch32EL(EL1) then UNDEFINED; elsif PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EffectiveHCR_EL2_NVx() IN {'xx1'} then AArch64.SystemAccessTrap(EL2, 0x18); else UNDEFINED; elsif PSTATE.EL == EL2 then IFSR32_EL2 = X[t, 64]; elsif PSTATE.EL == EL3 then IFSR32_EL2 = X[t, 64];

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0
RES0															FnV	RES0			ExT	RES0	FS[4]	LPAE	RES0					FS[3:0]

63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48	47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0
RES0															FnV	RES0			ExT	RES0		LPAE	RES0			STATUS

IFSR32_EL2, Instruction Fault Status Register (EL2)

Purpose

Configuration

Attributes

Field descriptions

When TTBCR.EAE == 0:

Bits [63:17]

FnV, bit [16]

Bits [15:13]

ExT, bit [12]

Bit [11]

FS, bits [10, 3:0]

LPAE, bit [9]

Bits [8:4]

When TTBCR.EAE == 1:

Bits [63:17]

FnV, bit [16]

Bits [15:13]

ExT, bit [12]

Bits [11:10]

LPAE, bit [9]

Bits [8:6]

STATUS, bits [5:0]

Accessing IFSR32_EL2

MRS <Xt>, IFSR32_EL2

MSR IFSR32_EL2, <Xt>