AMEVCNTR0<n>, Activity Monitors Event Counter Registers 0, n = 0 - 3

The AMEVCNTR0<n> characteristics are:

Purpose

Provides access to the architected activity monitor event counters.

Configuration

External register AMEVCNTR0<n> bits [63:0] are architecturally mapped to AArch64 System register AMEVCNTR0<n>_EL0[63:0].

External register AMEVCNTR0<n> bits [31:0] are architecturally mapped to AArch32 System register AMEVCNTR0<n>[31:0].

It is IMPLEMENTATION DEFINED whether AMEVCNTR0<n> is implemented in the Core power domain or in the Debug power domain.

This register is present only when FEAT_AMUv1 is implemented. Otherwise, direct accesses to AMEVCNTR0<n> are RES0.

Attributes

AMEVCNTR0<n> is a 64-bit register.

This register is part of the AMU block.

Field descriptions

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
ACNT
ACNT

ACNT, bits [63:0]

Architected activity monitor event counter n.

Value of architected activity monitor event counter n, where n is the number of this register and is a number from 0 to 3.

The reset behavior of this field is:

Accessing AMEVCNTR0<n>

If <n> is greater than or equal to the number of architected activity monitor event counters, reads of AMEVCNTR0<n> are RAZ. Software must treat reserved accesses as RES0. See 'Access requirements for reserved and unallocated registers'.

Note

AMCGCR.CG0NC identifies the number of architected activity monitor event counters.

Accesses to this register use the following encodings:

When FEAT_AMU_EXT64 is implemented

[63:0] Accessible at offset 0x000 + (8 * n) from AMU

Accesses on this interface are RO.

When FEAT_AMU_EXT32 is implemented

[63:0] Accessible at offset 0x000 + (8 * n) from AMU

Accesses on this interface are RO.


26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.