ERRIRQCR<n>, Generic Error Interrupt Configuration Register <n>, n = 0 - 15

The ERRIRQCR<n> characteristics are:

Purpose

The ERRIRQCR<n> registers are reserved for IMPLEMENTATION DEFINED interrupt configuration registers.

The architecture provides a recommended layout for the ERRIRQCR<n> registers. These registers are named:

• ERRFHICR0, ERRFHICR1, and ERRFHICR2 for the fault handling interrupt controls.
• ERRERICR0, ERRERICR1, and ERRERICR2 for the error recovery interrupt controls.
• ERRCRICR0, ERRCRICR1, and ERRCRICR2 for the critical error interrupt controls.
• ERRIRQSR for the status register.

This section describes the generic, IMPLEMENTATION DEFINED, format.

Configuration

This register is present only when the interrupt configuration registers are implemented. Otherwise, direct accesses to ERRIRQCR<n> are RES0.

ERRIRQCR<n> is implemented only as part of a memory-mapped group of error records.

Attributes

ERRIRQCR<n> is a 64-bit register.

Field descriptions

IMPLEMENTATION DEFINED, bits [63:0]

Accessing ERRIRQCR<n>

ERRIRQCR<n> can be accessed through the memory-mapped interfaces:

Accesses on this interface are RW.

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.