The GICR_ICENABLER0 characteristics are:
Disables forwarding of the corresponding SGI or PPI to the CPU interfaces.
A copy of this register is provided for each Redistributor.
GICR_ICENABLER0 is a 32-bit register.
For PPIs and SGIs, controls the forwarding of interrupt number x to the CPU interfaces. Reads and writes have the following behavior:
| Clear_enable_bit<x> | Meaning |
|---|---|
| 0b0 | If read, indicates that forwarding of the corresponding interrupt is disabled. If written, has no effect. |
| 0b1 | If read, indicates that forwarding of the corresponding interrupt is enabled. If written, disables forwarding of the corresponding interrupt. After a write of 1 to this bit, a subsequent read of this bit returns 0. |
The reset behavior of this field is:
When affinity routing is not enabled for the Security state of an interrupt in GICR_ICENABLER0, the corresponding bit is RAZ/WI and equivalent functionality is provided by GICD_ICENABLER<n> with n=0.
This register only applies to SGIs (bits [15:0]) and PPIs (bits [31:16]). For SPIs, this functionality is provided by GICD_ICENABLER<n>.
When GICD_CTLR.DS == 0, bits corresponding to Secure SGIs and PPIs are RAZ/WI to Non-secure accesses.
| Component | Frame | Offset | Instance |
|---|---|---|---|
| GIC Redistributor | SGI_base | 0x0180 | GICR_ICENABLER0 |
Accesses on this interface are RW.
26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.