GICR_ISACTIVER0, Interrupt Set-Active Register 0

The GICR_ISACTIVER0 characteristics are:

Purpose

Activates the corresponding SGI or PPI. These registers are used when saving and restoring GIC state.

Configuration

A copy of this register is provided for each Redistributor.

Attributes

GICR_ISACTIVER0 is a 32-bit register.

Field descriptions

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
Set_active_bit31	Set_active_bit30	Set_active_bit29	Set_active_bit28	Set_active_bit27	Set_active_bit26	Set_active_bit25	Set_active_bit24	Set_active_bit23	Set_active_bit22	Set_active_bit21	Set_active_bit20	Set_active_bit19	Set_active_bit18	Set_active_bit17	Set_active_bit16	Set_active_bit15	Set_active_bit14	Set_active_bit13	Set_active_bit12	Set_active_bit11	Set_active_bit10	Set_active_bit9	Set_active_bit8	Set_active_bit7	Set_active_bit6	Set_active_bit5	Set_active_bit4	Set_active_bit3	Set_active_bit2	Set_active_bit1	Set_active_bit0

Set_active_bit<x>, bit [x], for x = 31 to 0

Adds the active state to interrupt number x. Reads and writes have the following behavior:

Set_active_bit<x>	Meaning
0b0	If read, indicates that the corresponding interrupt is not active, and is not active and pending. If written, has no effect.
0b1	If read, indicates that the corresponding interrupt is active, or is active and pending. If written, activates the corresponding interrupt, if the interrupt is not already active. If the interrupt is already active, the write has no effect. After a write of 1 to this bit, a subsequent read of this bit returns 1.

Set_active_bit<x>

Meaning

0b0

If read, indicates that the corresponding interrupt is not active, and is not active and pending.

If written, has no effect.

0b1

If read, indicates that the corresponding interrupt is active, or is active and pending.

If written, activates the corresponding interrupt, if the interrupt is not already active. If the interrupt is already active, the write has no effect.

After a write of 1 to this bit, a subsequent read of this bit returns 1.

The reset behavior of this field is:

On a GIC reset, this field resets to 0.

Accessing GICR_ISACTIVER0

When affinity routing is not enabled for the Security state of an interrupt in GICR_ISACTIVER0, the corresponding bit is RAZ/WI and equivalent functionality is provided by GICD_ISACTIVER<n> with n=0.

This register only applies to SGIs (bits [15:0]) and PPIs (bits [31:16]). For SPIs, this functionality is provided by GICD_ISACTIVER<n>.

When GICD_CTLR.DS == 0, bits corresponding to Secure SGIs and PPIs are RAZ/WI to Non-secure accesses.

GICR_ISACTIVER0 can be accessed through the memory-mapped interfaces:

Component	Frame	Offset	Instance
GIC Redistributor	SGI_base	0x0300	GICR_ISACTIVER0

Accesses on this interface are RW.

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6