TRCBBCTLR, Trace Branch Broadcast Control Register

The TRCBBCTLR characteristics are:

Purpose

Controls the regions in the memory map where branch broadcasting is active.

Configuration

External register TRCBBCTLR bits [31:0] are architecturally mapped to AArch64 System register TRCBBCTLR[31:0].

This register is present only when FEAT_ETE is implemented, FEAT_TRC_EXT is implemented, TRCIDR0.TRCBB == 1 and UInt(TRCIDR4.NUMACPAIRS) > 0. Otherwise, direct accesses to TRCBBCTLR are RES0.

Attributes

TRCBBCTLR is a 32-bit register.

Field descriptions

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																							MODE	RANGE[7]	RANGE[6]	RANGE[5]	RANGE[4]	RANGE[3]	RANGE[2]	RANGE[1]	RANGE[0]

Bits [31:9]

Reserved, RES0.

MODE, bit [8]

Mode.

MODE	Meaning
0b0	Exclude Mode. Branch broadcasting is not active for instructions in the address ranges defined by TRCBBCTLR.RANGE. If TRCBBCTLR.RANGE == 0x00 then branch broadcasting is active for all instructions.
0b1	Include Mode. Branch broadcasting is active for instructions in the address ranges defined by TRCBBCTLR.RANGE. If TRCBBCTLR.RANGE == 0x00 then the behavior of the trace unit is CONSTRAINED UNPREDICTABLE. That is, the trace unit might or might not consider any instructions to be in a branch broadcasting region.

MODE

Meaning

0b0

Exclude Mode.

Branch broadcasting is not active for instructions in the address ranges defined by TRCBBCTLR.RANGE.

If TRCBBCTLR.RANGE == 0x00 then branch broadcasting is active for all instructions.

0b1

Include Mode.

Branch broadcasting is active for instructions in the address ranges defined by TRCBBCTLR.RANGE.

If TRCBBCTLR.RANGE == 0x00 then the behavior of the trace unit is CONSTRAINED UNPREDICTABLE. That is, the trace unit might or might not consider any instructions to be in a branch broadcasting region.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

RANGE[<m>], bit [m], for m = 7 to 0

Selects whether Address Range Comparator <m> is used with branch broadcasting.

RANGE[<m>]	Meaning
0b0	The address range that Address Range Comparator <m> defines, is not selected.
0b1	The address range that Address Range Comparator <m> defines, is selected.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing this field has the following behavior:

When m >= UInt(TRCIDR4.NUMACPAIRS), access to this field is RES0 .
Otherwise, access to this field is RW.

Accessing TRCBBCTLR

Must be programmed if TRCCONFIGR.BB == 1.

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

TRCBBCTLR can be accessed through the external debug interface:

Component	Offset	Instance
ETE	0x03C	TRCBBCTLR

This interface is accessible as follows:

When OSLockStatus(), or !AllowExternalTraceAccess() or !IsTraceCorePowered(), accesses to this register generate an error response.
Otherwise, accesses to this register are RW.

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6