TRCCNTRLDVR<n>, Trace Counter Reload Value Register <n>, n = 0 - 3

The TRCCNTRLDVR<n> characteristics are:

Purpose

This sets or returns the reload count value for Counter <n>.

Configuration

External register TRCCNTRLDVR<n> bits [31:0] are architecturally mapped to AArch64 System register TRCCNTRLDVR<n>[31:0].

This register is present only when FEAT_ETE is implemented, FEAT_TRC_EXT is implemented and UInt(TRCIDR5.NUMCNTR) > n. Otherwise, direct accesses to TRCCNTRLDVR<n> are RES0.

Attributes

TRCCNTRLDVR<n> is a 32-bit register.

Field descriptions

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																VALUE

Bits [31:16]

Reserved, RES0.

VALUE, bits [15:0]

Contains the reload value for Counter <n>. When a reload event occurs for Counter <n> then the trace unit copies the VALUE<n> field into Counter <n>.

The reset behavior of this field is:

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing TRCCNTRLDVR<n>

Must be programmed if TRCRSCTLR<a>.GROUP == 0b0010 and TRCRSCTLR<a>.COUNTERS[n] == 1.

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

TRCCNTRLDVR<n> can be accessed through the external debug interface:

Component	Offset	Instance
ETE	0x140 + (4 * n)	TRCCNTRLDVR<n>

This interface is accessible as follows:

When OSLockStatus(), or !AllowExternalTraceAccess() or !IsTraceCorePowered(), accesses to this register generate an error response.
Otherwise, accesses to this register are RW.

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6