PMINTENCLR

Allows software to disable the generation of interrupt requests on overflows from the following counters:

Configuration

AArch32 System register PMINTENCLR bits [31:0] are architecturally mapped to AArch64 System register PMINTENCLR_EL1[31:0].

AArch32 System register PMINTENCLR bits [31:0] are architecturally mapped to External register PMU.PMINTENCLR_EL1[31:0].

This register is present only when EL1 is capable of using AArch32 and FEAT_PMUv3 is implemented. Otherwise, direct accesses to PMINTENCLR are UNDEFINED.

Attributes

Field descriptions

C, bit [31]

Interrupt request or PMU exception on unsigned overflow of PMCCNTR disable. On writes, allows software to disable the interrupt request or PMU exception on unsigned overflow of PMCCNTR. On reads, returns the interrupt request or PMU exception on unsigned overflow of PMCCNTR enable status.

C	Meaning
0b0	Interrupt request or PMU exception on unsigned overflow of PMCCNTR disabled.
0b1	Interrupt request or PMU exception on unsigned overflow of PMCCNTR enabled.

Access to this field is W1C.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

P<m>, bit [m], for m = 30 to 0

Interrupt request or PMU exception on unsigned overflow of PMEVCNTR<m> disable. On writes, allows software to disable the interrupt request or PMU exception on unsigned overflow of PMEVCNTR<m>. On reads, returns the interrupt request or PMU exception on unsigned overflow of PMEVCNTR<m> enable status.

P<m>	Meaning
0b0	Interrupt request or PMU exception on unsigned overflow of PMEVCNTR<m> disabled.
0b1	Interrupt request or PMU exception on unsigned overflow of PMEVCNTR<m> enabled.

Accessing this field has the following behavior:

This field reads-as-zero and ignores writes if any of the following are true:
- All of the following are true:
  - EL2 is implemented and enabled in the current Security state.
  - m >= UInt(MDCR_EL2.HPMN).
  - EL2 using AArch64.
  - Accessed at EL1.
- All of the following are true:
  - EL2 is implemented and enabled in the current Security state.
  - m >= UInt(HDCR.HPMN).
  - EL2 using AArch32.
  - Accessed at EL1.
- m >= UInt(PMCR.N).
Otherwise access to this field is W1C.

The reset behavior of this field is:

On a Warm reset, this field resets to an architecturally UNKNOWN value.

Accessing PMINTENCLR

Accesses to this register use the following encodings in the System register encoding space:

MRC{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}

coproc	opc1	CRn	CRm	opc2
0b1111	0b000	0b1001	0b1110	0b010

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then UNDEFINED; elsif EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T9 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T9 == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.TPM == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HDCR.TPM == '1' then AArch32.TakeHypTrapException(0x03); elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.AArch32SystemAccessTrap(EL3, 0x03); else R[t] = PMINTENCLR; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then UNDEFINED; elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.AArch32SystemAccessTrap(EL3, 0x03); else R[t] = PMINTENCLR; elsif PSTATE.EL == EL3 then R[t] = PMINTENCLR;

MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}

coproc	opc1	CRn	CRm	opc2
0b1111	0b000	0b1001	0b1110	0b010

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if HaveEL(EL3) && EL3SDDUndefPriority() && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then UNDEFINED; elsif EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T9 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T9 == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.TPM == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HDCR.TPM == '1' then AArch32.TakeHypTrapException(0x03); elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.AArch32SystemAccessTrap(EL3, 0x03); else PMINTENCLR = R[t]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && EL3SDDUndefPriority() && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then UNDEFINED; elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then if EL3SDDUndef() then UNDEFINED; else AArch64.AArch32SystemAccessTrap(EL3, 0x03); else PMINTENCLR = R[t]; elsif PSTATE.EL == EL3 then PMINTENCLR = R[t];

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
C	P30	P29	P28	P27	P26	P25	P24	P23	P22	P21	P20	P19	P18	P17	P16	P15	P14	P13	P12	P11	P10	P9	P8	P7	P6	P5	P4	P3	P2	P1	P0

PMINTENCLR, Performance Monitors Interrupt Enable Clear register

Purpose