ERRPIDR1, Peripheral Identification Register 1

The ERRPIDR1 characteristics are:

Purpose

Provides discovery information about the component.

For more information, see 'About the Peripheral identification scheme'.

Configuration

Implementation of this register is OPTIONAL.

ERRPIDR1 is implemented only as part of a memory-mapped group of error records.

Attributes

ERRPIDR1 is a 32-bit register.

Field descriptions

313029282726252423222120191817161514131211109876543210
RES0DES_0PART_1

Bits [31:8]

Reserved, RES0.

DES_0, bits [7:4]

Designer, JEP106 identification code, bits [3:0]. ERRPIDR1.DES_0 and ERRPIDR2.DES_1 together form the JEDEC-assigned JEP106 identification code for the designer of the component. The parity bit in the JEP106 identification code is not included. The code identifies the designer of the component, which might not be not the same as the implementer of the device containing the component. To obtain a number, or to see the assignment of these codes, contact JEDEC http://www.jedec.org.

Note

For a component designed by Arm Limited, the JEP106 identification code is 0x3B.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

PART_1, bits [3:0]

Part number, bits [11:8].

The part number is selected by the designer of the component. The designer chooses whether to use a 12-bit or a 16-bit part number:

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Accessing ERRPIDR1

ERRPIDR1 can be accessed through the memory-mapped interfaces:

ComponentOffsetInstance
RAS0xFE4ERRPIDR1

Accesses on this interface are RO.


26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.