ERRPIDR2

Reserved, RES0.

Component major revision. ERRPIDR2.REVISION and ERRPIDR3.REVAND together form the revision number of the component, with ERRPIDR2.REVISION being the most significant part and ERRPIDR3.REVAND the least significant part. When a component is changed, ERRPIDR2.REVISION or ERRPIDR3.REVAND are increased to ensure that software can differentiate the different revisions of the component. ERRPIDR3.REVAND should be set to 0b0000 when ERRPIDR2.REVISION is increased.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

JEDEC-assigned JEP106 implementer code is used.

Reads as 0b1.

Access to this field is RO.

Designer, JEP106 identification code, bits [6:4]. ERRPIDR1.DES_0 and ERRPIDR2.DES_1 together form the JEDEC-assigned JEP106 identification code for the designer of the component. The parity bit in the JEP106 identification code is not included. The code identifies the designer of the component, which might not be not the same as the implementer of the device containing the component. To obtain a number, or to see the assignment of these codes, contact JEDEC http://www.jedec.org.

Note

For a component designed by Arm Limited, the JEP106 identification code is 0x3B.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

Reserved, RES0.

Part number, bits [15:12].

The part number is selected by the designer of the component. The designer chooses whether to use a 12-bit or a 16-bit part number:

If a 12-bit part number is used, then it is stored in ERRPIDR1.PART_1 and ERRPIDR0.PART_0. There are 8 bits, ERRPIDR2.REVISION and ERRPIDR3.REVAND, available to define the revision of the component.
If a 16-bit part number is used, then it is stored in ERRPIDR2.PART_2, ERRPIDR1.PART_1 and ERRPIDR0.PART_0. There are 4 bits, ERRPIDR3.REVISION, available to define the revision of the component.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

JEDEC-assigned JEP106 implementer code is used.

Reads as 0b1.

Access to this field is RO.

Designer, JEP106 identification code, bits [6:4]. ERRPIDR1.DES_0 and ERRPIDR2.DES_1 together form the JEDEC-assigned JEP106 identification code for the designer of the component. The parity bit in the JEP106 identification code is not included. The code identifies the designer of the component, which might not be not the same as the implementer of the device containing the component. To obtain a number, or to see the assignment of these codes, contact JEDEC http://www.jedec.org.

Note

For a component designed by Arm Limited, the JEP106 identification code is 0x3B.

This field has an IMPLEMENTATION DEFINED value.

Access to this field is RO.

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																								REVISION				JEDEC	DES_1

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																								PART_2				JEDEC	DES_1

ERRPIDR2, Peripheral Identification Register 2

Purpose

Configuration

Attributes

Field descriptions

When the component uses a 12-bit part number:

Bits [31:8]

REVISION, bits [7:4]

JEDEC, bit [3]

DES_1, bits [2:0]

When the component uses a 16-bit part number:

Bits [31:8]

PART_2, bits [7:4]

JEDEC, bit [3]

DES_1, bits [2:0]

Accessing ERRPIDR2

ERRPIDR2 can be accessed through the memory-mapped interfaces: