Bitwise Insert if False. This instruction inserts each bit from the first source SIMD&FP register into the destination SIMD&FP register if the corresponding bit of the second source SIMD&FP register is 0, otherwise leaves the bit in the destination register unchanged.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | Q | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | Rm | 0 | 0 | 0 | 1 | 1 | 1 | Rn | Rd | ||||||||||||
| U | opc2 | opcode | |||||||||||||||||||||||||||||
integer d = UInt(Rd); integer n = UInt(Rn); integer m = UInt(Rm); constant integer datasize = 64 << UInt(Q);
| <Vd> |
Is the name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <T> |
Is an arrangement specifier,
encoded in
|
| <Vn> |
Is the name of the first SIMD&FP source register, encoded in the "Rn" field. |
| <Vm> |
Is the name of the second SIMD&FP source register, encoded in the "Rm" field. |
CheckFPAdvSIMDEnabled64(); bits(datasize) operand1; bits(datasize) operand3; bits(datasize) operand4 = V[n, datasize]; operand1 = V[d, datasize]; operand3 = NOT(V[m, datasize]); V[d, datasize] = operand1 EOR ((operand1 EOR operand4) AND operand3);
If PSTATE.DIT is 1:
Internal version only: aarchmrs v2024-03_relA, pseudocode v2024-03_rel, sve v2024-03_rel ; Build timestamp: 2024-03-26T09:45
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.