Floating-point Convert precision (scalar). This instruction converts the floating-point value in the SIMD&FP source register to the precision for the destination register data type using the rounding mode that is determined by the FPCR and writes the result to the SIMD&FP destination register.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | ftype | 1 | 0 | 0 | 0 | 1 | opc | 1 | 0 | 0 | 0 | 0 | Rn | Rd | ||||||||||
| M | S | ||||||||||||||||||||||||||||||
if ftype == opc || ftype == '10' || opc == '10' then UNDEFINED; integer d = UInt(Rd); integer n = UInt(Rn); constant integer srcsize = 8 << UInt(ftype EOR '10'); constant integer dstsize = 8 << UInt(opc EOR '10');
| <Sd> |
Is the 32-bit name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Hn> |
Is the 16-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
| <Dd> |
Is the 64-bit name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Hd> |
Is the 16-bit name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Sn> |
Is the 32-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
| <Dn> |
Is the 64-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPEnabled64(); bits(srcsize) operand = V[n, srcsize]; bits(128) result = if IsMerging(FPCR) then V[d, 128] else Zeros(128); Elem[result, 0, dstsize] = FPConvert(operand, FPCR, dstsize); V[d, 128] = result;
Internal version only: aarchmrs v2024-03_relA, pseudocode v2024-03_rel, sve v2024-03_rel ; Build timestamp: 2024-03-26T09:45
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.