Floating-point Convert to lower precision Narrow, rounding to odd (vector). This instruction reads each vector element in the source SIMD&FP register, narrows each value to half the precision of the source element using the Round to Odd rounding mode, writes the result to a vector, and writes the vector to the destination SIMD&FP register.
This instruction uses the Round to Odd rounding mode which is not defined by the IEEE 754-2008 standard. This rounding mode ensures that if the result of the conversion is inexact the least significant bit of the mantissa is forced to 1. This rounding mode enables a floating-point value to be converted to a lower precision format via an intermediate precision format while avoiding double rounding errors. For example, a 64-bit floating-point value can be converted to a correctly rounded 16-bit floating-point value by first using this instruction to produce a 32-bit value and then using another instruction with the wanted rounding mode to convert the 32-bit value to the final 16-bit floating-point value.
The FCVTXN instruction writes the vector to the lower half of the destination register and clears the upper half. The FCVTXN2 instruction writes the vector to the upper half of the destination register without affecting the other bits of the register.
This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR or a synchronous exception being generated. For more information, see Floating-point exception traps.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
It has encodings from 2 classes: Scalar and Vector
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | 1 | 0 | Rn | Rd | ||||||||
| U | size | opcode | |||||||||||||||||||||||||||||
integer d = UInt(Rd); integer n = UInt(Rn); constant integer esize = 32; constant integer datasize = esize; integer elements = 1; integer part = 0;
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | Q | 1 | 0 | 1 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | 1 | 0 | Rn | Rd | ||||||||
| U | size | opcode | |||||||||||||||||||||||||||||
integer d = UInt(Rd); integer n = UInt(Rn); constant integer esize = 32; constant integer datasize = 64; integer elements = 2; integer part = UInt(Q);
| <d> |
Is the number of the SIMD&FP destination register, encoded in the "Rd" field. |
| <n> |
Is the number of the SIMD&FP source register, encoded in the "Rn" field. |
| <Vd> |
Is the name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Tb> |
Is an arrangement specifier,
encoded in
|
| <Vn> |
Is the name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPAdvSIMDEnabled64(); bits(2*datasize) operand = V[n, 2*datasize]; boolean merge = elements == 1 && IsMerging(FPCR); bits(128) result = if merge then V[d, 128] else Zeros(128); for e = 0 to elements-1 Elem[result, e, esize] = FPConvert(Elem[operand, e, 2*esize], FPCR, FPRounding_ODD, esize); if merge then V[d, 128] = result; else Vpart[d, part, datasize] = Elem[result, 0, datasize];
Internal version only: aarchmrs v2024-03_relA, pseudocode v2024-03_rel, sve v2024-03_rel ; Build timestamp: 2024-03-26T09:45
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.