AArch32 Registers
AArch64 Registers
AArch32 Instructions
AArch64 Instructions
Index by Encoding
External Registers
External Registers by Offset
Registers by Functional Group
Proprietary Notice

PAR, Physical Address Register

The PAR characteristics are:

Purpose

Returns the output address (OA) from an Address translation instruction that executed successfully, or fault information if the instruction did not execute successfully.

Configuration

This register is banked between PAR and PAR_S and PAR_NS.

AArch32 System register PAR bits [63:0] are architecturally mapped to AArch64 System register PAR_EL1[63:0].

This register is present only when EL1 is capable of using AArch32. Otherwise, direct accesses to PAR are UNDEFINED.

PAR is a 64-bit register that can also be accessed as a 32-bit value. If it is accessed as a 32-bit register, accesses read and write bits[31:0] and do not modify bits[63:32].

The Configurations section specifies the cases where each PAR format is used.

PAR is accessed as a 32-bit value:

In these cases, PAR[63:32] is RES0.

Otherwise, the PAR is accessed as a 64-bit value, if any of the following is true:

For PL1&0 stage 1 translations, TTBCR.EAE selects the translation table format.

Attributes

PAR is a 64-bit register.

This register has the following instances:

Field descriptions

When the instruction returned a 32-bit value to the PAR, PAR.F==0:

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
RES0
PALPAENOSNSIMPLEMENTATION DEFINEDSHInner[2:0]Outer[1:0]SSF

This section describes the register value returned by the successful execution of an Address translation instruction. Software might subsequently write a different value to the register, and that write does not affect the operation of the PE.

On a successful conversion, the PAR can return a value that indicates the resulting attributes, rather than the values that appear in the Translation table descriptors. More precisely:

Bits [63:32]

Reserved, RES0.

PA, bits [31:12]

Output address. The output address (OA) corresponding to the supplied input address. This field returns address bits[31:12].

The reset behavior of this field is:

LPAE, bit [11]

When updating the PAR with the result of the translation operation, this bit is set as follows:

LPAEMeaning
0b0

Short-descriptor translation table format used. This means the PAR returned a 32-bit value.

The reset behavior of this field is:

NOS, bit [10]

Not Outer Shareable. When the returned value of PAR.SH is 1, indicates the Shareability attribute for the physical memory region:

NOSMeaning
0b0

Memory region is Outer Shareable.

0b1

Memory region is Inner Shareable.

When the returned value of PAR.SH is 0 the value returned to this field is UNKNOWN.

The value returned in this field can be the resulting attribute, as determined by any permitted implementation choices and any applicable configuration bits, instead of the value that appears in the Translation table descriptor.

The reset behavior of this field is:

NS, bit [9]

Non-secure. The NS attribute for a translation table entry from a Secure translation regime.

For a result from a Secure translation regime, this bit reflects the Security state of the physical address space of the translation. This means it reflects the effect of the NSTable bits of earlier levels of the translation table walk if those NSTable bits have an effect on the translation.

For a result from a Non-secure translation regime, this bit is UNKNOWN.

The reset behavior of this field is:

IMPLEMENTATION DEFINED, bit [8]

IMPLEMENTATION DEFINED.

The reset behavior of this field is:

SH, bit [7]

Shareability. Indicates whether the physical memory region is Non-shareable:

SHMeaning
0b0

Memory is Non-shareable.

0b1

Memory is shareable, and PAR.NOS indicates whether the region is Outer Shareable or Inner Shareable.

The value returned in this field can be the resulting attribute, as determined by any permitted implementation choices and any applicable configuration bits, instead of the value that appears in the Translation table descriptor.

The reset behavior of this field is:

Inner[2:0], bits [6:4]

Inner cacheability attribute for the region. Permitted values are:

Inner[2:0]Meaning
0b000

Non-cacheable.

0b001

Device-nGnRnE.

0b011

Device-nGnRE.

0b101

Write-Back, Write-Allocate.

0b110

Write-Through.

0b111

Write-Back, no Write-Allocate.

The values 0b010 and 0b100 are reserved.

The value returned in this field can be the resulting attribute, as determined by any permitted implementation choices and any applicable configuration bits, instead of the value that appears in the Translation table descriptor.

The reset behavior of this field is:

Outer[1:0], bits [3:2]

Outer cacheability attribute for the region. Permitted values are:

Outer[1:0]Meaning
0b00

Non-cacheable.

0b01

Write-Back, Write-Allocate.

0b10

Write-Through, no Write-Allocate.

0b11

Write-Back, no Write-Allocate.

The value returned in this field can be the resulting attribute, as determined by any permitted implementation choices and any applicable configuration bits, instead of the value that appears in the Translation table descriptor.

The reset behavior of this field is:

SS, bit [1]

Supersection. Used to indicate if the result is a Supersection:

SSMeaning
0b0

Result is not a Supersection. PAR[31:12] contains OA[31:12].

0b1

Result is a Supersection, and:

  • PAR[31:24] contains OA[31:24].
  • PAR[23:16] contains OA[39:32].
  • PAR[15:12] contains 0b0000.

If an implementation supports less than 40 bits of physical address, the bits in the PAR field that correspond to physical address bits that are not implemented are UNKNOWN.

The reset behavior of this field is:

F, bit [0]

Indicates whether the instruction performed a successful address translation.

FMeaning
0b0

Address translation completed successfully.

The reset behavior of this field is:

When the instruction returned a 32-bit value to the PAR, PAR.F==1:

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
RES0
IMPLEMENTATION DEFINEDRES0LPAERES0FS[5]FS[4:0]F

This section describes the register value returned by a fault on the execution of an Address translation instruction. Software might subsequently write a different value to the register, and that write does not affect the operation of the PE.

Bits [63:32]

Reserved, RES0.

IMPLEMENTATION DEFINED, bits [31:16]

IMPLEMENTATION DEFINED.

The reset behavior of this field is:

Bits [15:12]

Reserved, RES0.

LPAE, bit [11]

When updating the PAR with the result of the translation operation, this bit is set as follows:

LPAEMeaning
0b0

Short-descriptor translation table format used. This means the PAR returned a 32-bit value.

The reset behavior of this field is:

Bits [10:7]

Reserved, RES0.

FS[5], bit [6]

Fault status bits, External abort type. Provides an IMPLEMENTATION DEFINED classification of an External abort. Values are as in the DFSR.ExT field when using the Short-descriptor translation table format.

In an implementation that does not provide any classification of External aborts, this bit is RES0.

For aborts other than External aborts this bit always returns 0.

The reset behavior of this field is:

FS[4:0], bits [5:1]

Fault status bits. Values are as in the DFSR.FS field when using the Short-descriptor translation table format.

FS[4:0]MeaningApplies when
0b00001

Alignment fault.

0b00011

Access flag fault, level 1.

0b00100

Fault on instruction cache maintenance.

0b00101

Translation fault, level 1.

0b00110

Access flag fault, level 2.

0b00111

Translation fault, level 2.

0b01001

Domain fault, level 1.

0b01011

Domain fault, level 2.

0b01100

Synchronous External abort, on translation table walk, level 1.

0b01101

Permission fault, level 1.

0b01110

Synchronous External abort, on translation table walk, level 2.

0b01111

Permission fault, level 2.

0b10000

TLB conflict abort.

0b11001

Synchronous parity or ECC error on memory access, not on translation table walk.

When FEAT_RAS is not implemented
0b11100

Synchronous parity or ECC error on translation table walk, level 1.

When FEAT_RAS is not implemented
0b11110

Synchronous parity or ECC error on translation table walk, level 2.

When FEAT_RAS is not implemented

The reset behavior of this field is:

F, bit [0]

Indicates whether the instruction performed a successful address translation.

FMeaning
0b1

Address translation aborted.

The reset behavior of this field is:

When the instruction returned a 64-bit value to the PAR, PAR.F==0:

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
ATTRRES0PA
PALPAEIMPLEMENTATION DEFINEDNSSHRES0F

This section describes the register value returned by the successful execution of an Address translation instruction. Software might subsequently write a different value to the register, and that write does not affect the operation of the PE.

On a successful conversion, the PAR can return a value that indicates the resulting attributes, rather than the values that appear in the Translation table descriptors. More precisely:

ATTR, bits [63:56]

Memory attributes for the returned output address. This field uses the same encoding as the Attr<n> fields in MAIR0 and MAIR1.

The value returned in this field can be the resulting attribute, as determined by any permitted implementation choices and any applicable configuration bits, instead of the value that appears in the Translation table descriptor.

The reset behavior of this field is:

Bits [55:40]

Reserved, RES0.

PA, bits [39:12]

Output address. The output address (OA) corresponding to the supplied input address. This field returns address bits[39:12].

The reset behavior of this field is:

LPAE, bit [11]

When updating the PAR with the result of the translation operation, this bit is set as follows:

LPAEMeaning
0b1

Long-descriptor translation table format used. This means the PAR returned a 64-bit value.

The reset behavior of this field is:

IMPLEMENTATION DEFINED, bit [10]

IMPLEMENTATION DEFINED.

The reset behavior of this field is:

NS, bit [9]

Non-secure. The NS attribute for a translation table entry from a Secure translation regime.

For a result from a Secure translation regime, this bit reflects the Security state of the physical address space of the translation. This means it reflects the effect of the NSTable bits of earlier levels of the translation table walk if those NSTable bits have an effect on the translation.

For a result from a Non-secure translation regime, this bit is UNKNOWN.

The reset behavior of this field is:

SH, bits [8:7]

Shareability attribute, for the returned output address. Permitted values are:

SHMeaning
0b00

Non-shareable.

0b10

Outer Shareable.

0b11

Inner Shareable.

The value 0b01 is reserved.

Note

This field returns the value 0b10 for:

The value returned in this field can be the resulting attribute, as determined by any permitted implementation choices and any applicable configuration bits, instead of the value that appears in the Translation table descriptor.

The reset behavior of this field is:

Bits [6:1]

Reserved, RES0.

F, bit [0]

Indicates whether the instruction performed a successful address translation.

FMeaning
0b0

Address translation completed successfully.

The reset behavior of this field is:

When the instruction returned a 64-bit value to the PAR, PAR.F==1:

6362616059585756555453525150494847464544434241403938373635343332
313029282726252423222120191817161514131211109876543210
IMPLEMENTATION DEFINEDIMPLEMENTATION DEFINEDIMPLEMENTATION DEFINEDRES0
RES0LPAERES0FSTAGES2WLKRES0FSTF

This section describes the register value returned by a fault on the execution of an Address translation instruction. Software might subsequently write a different value to the register, and that write does not affect the operation of the PE.

IMPLEMENTATION DEFINED, bits [63:56]

IMPLEMENTATION DEFINED.

The reset behavior of this field is:

IMPLEMENTATION DEFINED, bits [55:52]

IMPLEMENTATION DEFINED.

The reset behavior of this field is:

IMPLEMENTATION DEFINED, bits [51:48]

IMPLEMENTATION DEFINED.

The reset behavior of this field is:

Bits [47:12]

Reserved, RES0.

LPAE, bit [11]

When updating the PAR with the result of the translation operation, this bit is set as follows:

LPAEMeaning
0b1

Long-descriptor translation table format used. This means the PAR returned a 64-bit value.

The reset behavior of this field is:

Bit [10]

Reserved, RES0.

FSTAGE, bit [9]

Indicates the translation stage at which the translation aborted:

FSTAGEMeaning
0b0

Translation aborted because of a fault in the stage 1 translation.

0b1

Translation aborted because of a fault in the stage 2 translation.

The reset behavior of this field is:

S2WLK, bit [8]

If this bit is set to 1, it indicates the translation aborted because of a stage 2 fault during a stage 1 translation table walk.

The reset behavior of this field is:

Bit [7]

Reserved, RES0.

FST, bits [6:1]

Fault status field. Values are as in the DFSR.STATUS and IFSR.STATUS fields when using the Long-descriptor translation table format.

FSTMeaningApplies when
0b000000

Address size fault in translation table base register.

0b000001

Address size fault, level 1.

0b000010

Address size fault, level 2.

0b000011

Address size fault, level 3.

0b000101

Translation fault, level 1.

0b000110

Translation fault, level 2.

0b000111

Translation fault, level 3.

0b001001

Access flag fault, level 1.

0b001010

Access flag fault, level 2.

0b001011

Access flag fault, level 3.

0b001101

Permission fault, level 1.

0b001110

Permission fault, level 2.

0b001111

Permission fault, level 3.

0b010101

Synchronous External abort on translation table walk, level 1.

0b010110

Synchronous External abort on translation table walk, level 2.

0b010111

Synchronous External abort on translation table walk, level 3.

0b011101

Synchronous parity or ECC error on memory access on translation table walk, level 1.

When FEAT_RAS is not implemented
0b011110

Synchronous parity or ECC error on memory access on translation table walk, level 2.

When FEAT_RAS is not implemented
0b011111

Synchronous parity or ECC error on memory access on translation table walk, level 3.

When FEAT_RAS is not implemented
0b110000

TLB conflict abort.

The reset behavior of this field is:

F, bit [0]

Indicates whether the instruction performed a successful address translation.

FMeaning
0b1

Address translation aborted.

The reset behavior of this field is:

Accessing PAR

Accesses to this register use the following encodings in the System register encoding space:

MRC{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}

coprocopc1CRnCRmopc2
0b11110b0000b01110b01000b000

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then AArch32.TakeHypTrapException(0x03); elsif HaveEL(EL3) && ELUsingAArch32(EL3) then R[t] = PAR_NS<31:0>; else R[t] = PAR<31:0>; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && ELUsingAArch32(EL3) then R[t] = PAR_NS<31:0>; else R[t] = PAR<31:0>; elsif PSTATE.EL == EL3 then if SCR.NS == '0' then R[t] = PAR_S<31:0>; else R[t] = PAR_NS<31:0>;

MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}

coprocopc1CRnCRmopc2
0b11110b0000b01110b01000b000

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then AArch32.TakeHypTrapException(0x03); elsif HaveEL(EL3) && ELUsingAArch32(EL3) then PAR_NS<31:0> = R[t]; else PAR<31:0> = R[t]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && ELUsingAArch32(EL3) then PAR_NS<31:0> = R[t]; else PAR<31:0> = R[t]; elsif PSTATE.EL == EL3 then if SCR.NS == '0' then PAR_S<31:0> = R[t]; else PAR_NS<31:0> = R[t];

MRRC{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <Rt2>, <CRm>

coprocCRmopc1
0b11110b01110b0000

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x04); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then AArch32.TakeHypTrapException(0x04); elsif HaveEL(EL3) && ELUsingAArch32(EL3) then (R[t2], R[t]) = (PAR_NS<63:32>, PAR_NS<31:0>); else (R[t2], R[t]) = (PAR<63:32>, PAR<31:0>); elsif PSTATE.EL == EL2 then if HaveEL(EL3) && ELUsingAArch32(EL3) then (R[t2], R[t]) = (PAR_NS<63:32>, PAR_NS<31:0>); else (R[t2], R[t]) = (PAR<63:32>, PAR<31:0>); elsif PSTATE.EL == EL3 then if SCR.NS == '0' then (R[t2], R[t]) = (PAR_S<63:32>, PAR_S<31:0>); else (R[t2], R[t]) = (PAR_NS<63:32>, PAR_NS<31:0>);

MCRR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <Rt2>, <CRm>

coprocCRmopc1
0b11110b01110b0000

if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x04); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then AArch32.TakeHypTrapException(0x04); elsif HaveEL(EL3) && ELUsingAArch32(EL3) then PAR_NS = R[t2]:R[t]; else PAR = R[t2]:R[t]; elsif PSTATE.EL == EL2 then if HaveEL(EL3) && ELUsingAArch32(EL3) then PAR_NS = R[t2]:R[t]; else PAR = R[t2]:R[t]; elsif PSTATE.EL == EL3 then if SCR.NS == '0' then PAR_S = R[t2]:R[t]; else PAR_NS = R[t2]:R[t];

AArch32 Registers
AArch64 Registers
AArch32 Instructions
AArch64 Instructions
Index by Encoding
External Registers
External Registers by Offset
Registers by Functional Group
Proprietary Notice

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.