GICV_ABPR, Virtual Machine Aliased Binary Point Register

The GICV_ABPR characteristics are:

Purpose

Defines the point at which the priority value fields split into two parts, the group priority field and the subpriority field. The group priority field determines Group 1 interrupt preemption.

This register corresponds to GICC_ABPR in the physical CPU interface.

Note

GICH_LR<n>.Group determines whether a virtual interrupt is Group 0 or Group 1.

Configuration

This register is present only when FEAT_GICv3_LEGACY is implemented and EL2 is implemented. Otherwise, direct accesses to GICV_ABPR are RES0.

This register is available when the GIC implementation supports interrupt virtualization.

Attributes

GICV_ABPR is a 32-bit register.

Field descriptions

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
RES0																													Binary_Point

Bits [31:3]

Reserved, RES0.

Binary_Point, bits [2:0]

Controls how the 8-bit interrupt priority field is split into a group priority field, that determines interrupt preemption, and a subpriority field.

For information about how this field determines the interrupt priority bits assigned to the group priority field, see 'Priority grouping' in ARM® Generic Interrupt Controller Architecture Specification, GIC architecture version 3.0 and version 4.0 (ARM IHI 0069).

The reset behavior of this field is:

On a Warm reset, this field resets to 0.

Additional information

The Binary_Point field of this register is aliased to GICH_VMCR.VBPR1.

Accessing GICV_ABPR

This register is used only when System register access is not enabled. When System register access is enabled:

For AArch32 implementations, ICC_BPR1 provides equivalent functionality.
For AArch64 implementations, ICC_BPR1_EL1 provides equivalent functionality.

The value contained in this register is one greater than the actual applied binary point value, as described in 'Priority grouping' in ARM® Generic Interrupt Controller Architecture Specification, GIC architecture version 3.0 and version 4.0 (ARM IHI 0069).

This register is used for Group 1 interrupts when GICV_CTLR.CBPR == 0. GICV_BPR provides equivalent functionality for Group 0 interrupts, and for Group 1 interrupts when GICV_CTLR.CBPR == 1.

GICV_ABPR can be accessed through the memory-mapped interfaces:

Component	Offset	Instance
GIC Virtual CPU interface	0x001C	GICV_ABPR

This interface is accessible as follows:

When GICD_CTLR.DS == 0, accesses to this register are RW.
When an access is Secure, accesses to this register are RW.
When an access is Non-secure, accesses to this register are RW.

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6