MSMON_CFG_MBWU_FLT, MPAM Memory System Monitor Configure Memory Bandwidth Usage Monitor Filter Register

The MSMON_CFG_MBWU_FLT characteristics are:

Purpose

Controls PARTID and PMG to measure or count in the MBWU monitor selected by MSMON_CFG_MON_SEL.

MSMON_CFG_MBWU_FLT_s sets filter conditions for the Secure memory bandwidth usage monitor instance selected by the Secure instance of MSMON_CFG_MON_SEL. MSMON_CFG_MBWU_CTL_ns sets filter conditions for the Non-secure memory bandwidth usage monitor instance selected by the Non-secure instance of MSMON_CFG_MON_SEL. MSMON_CFG_CSU_FLT_rt sets the filter conditions for the Root PARTID selected by the Root instance of MSMON_CFG_MON_SEL. MSMON_CFG_CSU_FLT_rl sets the filter conditions for the Realm PARTID selected by the Realm instance of MSMON_CFG_MON_SEL.

If MPAMF_IDR.HAS_RIS is 1, the monitor instance filter configuration accessed is for the resource instance currently selected by MSMON_CFG_MON_SEL.RIS and the monitor instance of that resource instance selected by MSMON_CFG_MON_SEL.MON_SEL.

Configuration

The power domain of MSMON_CFG_MBWU_FLT is IMPLEMENTATION DEFINED.

This register is present only when FEAT_MPAM is implemented, MPAMF_IDR.HAS_MSMON == 1 and MPAMF_MSMON_IDR.MSMON_MBWU == 1. Otherwise, direct accesses to MSMON_CFG_MBWU_FLT are RES0.

The power and reset domain of each MSC component is specific to that component.

Attributes

MSMON_CFG_MBWU_FLT is a 32-bit register.

Field descriptions

When FEAT_MPAMv0p1 is implemented or FEAT_MPAMv1p1 is implemented:

RWBW, bits [31:30]
When MPAMF_MBWUMON_IDR.HAS_RWBW == 1:

Otherwise:

Bits [29:24]

PMG, bits [23:16]

PARTID, bits [15:0]

Otherwise:

Bits [31:24]

PMG, bits [23:16]

PARTID, bits [15:0]

Accessing MSMON_CFG_MBWU_FLT

This register is within the MPAM feature page memory frames.

In a system that supports Secure, Non-secure, Root, and Realm memory maps, there must be MPAM feature pages in all four address maps:

• MSMON_CFG_MBWU_FLT_s must only be accessible from the Secure MPAM feature page.
• MSMON_CFG_MBWU_FLT_ns must only be accessible from the Non-secure MPAM feature page.
• MSMON_CFG_MBWU_FLT_rt must only be accessible from the Root MPAM feature page.
• MSMON_CFG_MBWU_FLT_rl must only be accessible from the Realm MPAM feature page.

MSMON_CFG_MBWU_FLT_s, MSMON_CFG_MBWU_FLT_ns, MSMON_CFG_MBWU_FLT_rt, and MSMON_CFG_MBWU_FLT_rl must be separate registers:

• The Secure instance (MSMON_CFG_MBWU_FLT_s) accesses the PARTID and PMG matching for a memory bandwidth usage monitor used for Secure PARTIDs.
• The Non-secure instance (MSMON_CFG_MBWU_FLT_ns) accesses the PARTID and PMG matching for a memory bandwidth usage monitor used for Non-secure PARTIDs.
• The Root instance (MSMON_CFG_MBWU_FLT_rt) accesses the PARTID and PMG matching for a memory bandwidth usage monitor used for Root PARTIDs.
• The Realm instance (MSMON_CFG_MBWU_FLT_rl) accesses the PARTID and PMG matching for a memory bandwidth usage monitor used for Realm PARTIDs.

When RIS is implemented, loads and stores to MSMON_CFG_MBWU_FLT access the monitor configuration settings for the bandwidth resource instance selected by MSMON_CFG_MON_SEL.RIS and the memory bandwidth usage monitor instance selected by MSMON_CFG_MON_SEL.MON_SEL.

When RIS is not implemented, loads and stores to MSMON_CFG_MBWU_FLT access the monitor configuration settings for the memory bandwidth usage monitor instance selected by MSMON_CFG_MON_SEL.MON_SEL.

MSMON_CFG_MBWU_FLT can be accessed through the memory-mapped interfaces:

Accesses on this interface are RW.

Accesses on this interface are RW.

When FEAT_RME is implemented, accesses on this interface are RW.

When FEAT_RME is implemented, accesses on this interface are RW.

26/03/2024 09:49; 67c0ae5282a7629ba0ea0ba7267b43cd4f7939f6

Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.