TRCIDR3

External register TRCIDR3 bits [31:0] are architecturally mapped to AArch64 System register TRCIDR3[31:0].

This register is present only when FEAT_ETE is implemented and FEAT_TRC_EXT is implemented. Otherwise, direct accesses to TRCIDR3 are RES0.

Attributes

Field descriptions

NOOVERFLOW, bit [31]

Indicates if overflow prevention is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

NOOVERFLOW	Meaning
0b0	Overflow prevention is not implemented.
0b1	Overflow prevention is implemented.

If TRCIDR3.STALLCTL == 0 then this field is 0.

Access to this field is RO.

NUMPROC, bits [13:12, 30:28]

Indicates the number of PEs available for tracing.

NUMPROC	Meaning
0b00000	The trace unit can trace one PE.

This field reads as 0b00000.

The NUMPROC field is split as follows:

NUMPROC[2:0] is TRCIDR3[30:28].
NUMPROC[4:3] is TRCIDR3[13:12].

Access to this field is RO.

SYSSTALL, bit [27]

Indicates if stalling of the PE is permitted.

The value of this field is an IMPLEMENTATION DEFINED choice of:

SYSSTALL	Meaning
0b0	Stalling of the PE is not permitted.
0b1	Stalling of the PE is permitted.

The value of this field might be dynamic and change based on system conditions.

If TRCIDR3.STALLCTL == 0 then this field is 0.

Access to this field is RO.

STALLCTL, bit [26]

Indicates if trace unit implements stalling of the PE.

The value of this field is an IMPLEMENTATION DEFINED choice of:

STALLCTL	Meaning
0b0	Stalling of the PE is not implemented.
0b1	Stalling of the PE is implemented.

Access to this field is RO.

SYNCPR, bit [25]

Indicates if an implementation has a fixed synchronization period.

The value of this field is an IMPLEMENTATION DEFINED choice of:

SYNCPR	Meaning
0b0	TRCSYNCPR is read/write so software can change the synchronization period.
0b1	TRCSYNCPR is read-only so the synchronization period is fixed.

This field reads as 0.

Access to this field is RO.

TRCERR, bit [24]

Indicates forced tracing of System Error exceptions is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

TRCERR	Meaning
0b0	Forced tracing of System Error exceptions is not implemented.
0b1	Forced tracing of System Error exceptions is implemented.

This field reads as 1.

Access to this field is RO.

Bit [23]

EXLEVEL_NS_EL2, bit [22]

Indicates if Non-secure EL2 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_NS_EL2	Meaning
0b0	Non-secure EL2 is not implemented.
0b1	Non-secure EL2 is implemented.

Access to this field is RO.

EXLEVEL_NS_EL1, bit [21]

Indicates if Non-secure EL1 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_NS_EL1	Meaning
0b0	Non-secure EL1 is not implemented.
0b1	Non-secure EL1 is implemented.

Access to this field is RO.

EXLEVEL_NS_EL0, bit [20]

Indicates if Non-secure EL0 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_NS_EL0	Meaning
0b0	Non-secure EL0 is not implemented.
0b1	Non-secure EL0 is implemented.

Access to this field is RO.

EXLEVEL_S_EL3, bit [19]

Indicates if EL3 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_S_EL3	Meaning
0b0	EL3 is not implemented.
0b1	EL3 is implemented.

Access to this field is RO.

EXLEVEL_S_EL2, bit [18]

Indicates if Secure EL2 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_S_EL2	Meaning
0b0	Secure EL2 is not implemented.
0b1	Secure EL2 is implemented.

Access to this field is RO.

EXLEVEL_S_EL1, bit [17]

Indicates if Secure EL1 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_S_EL1	Meaning
0b0	Secure EL1 is not implemented.
0b1	Secure EL1 is implemented.

Access to this field is RO.

EXLEVEL_S_EL0, bit [16]

Indicates if Secure EL0 is implemented.

The value of this field is an IMPLEMENTATION DEFINED choice of:

EXLEVEL_S_EL0	Meaning
0b0	Secure EL0 is not implemented.
0b1	Secure EL0 is implemented.

Access to this field is RO.

Bits [15:14]

CCITMIN, bits [11:0]
When TRCIDR0.TRCCCI == 0:

Indicates the minimum value that can be programmed in TRCCCCTLR.THRESHOLD.

Reads as 0x000.

Access to this field is RO.

When TRCIDR0.TRCCCI == 1:

Indicates the minimum value that can be programmed in TRCCCCTLR.THRESHOLD.

The value of this field is an IMPLEMENTATION DEFINED choice of:

CCITMIN	Meaning
0x001..0xFFF	The minimum value that can be programmed in TRCCCCTLR.THRESHOLD.

The minimum value of this field is 0x001.

Access to this field is RO.

Otherwise:

Accessing TRCIDR3

TRCIDR3 can be accessed through the external debug interface:

TRCIDR3, Trace ID Register 3

Purpose

Configuration

Attributes

Field descriptions

NOOVERFLOW, bit [31]

NUMPROC, bits [13:12, 30:28]

SYSSTALL, bit [27]

STALLCTL, bit [26]

SYNCPR, bit [25]

TRCERR, bit [24]

Bit [23]

EXLEVEL_NS_EL2, bit [22]

EXLEVEL_NS_EL1, bit [21]

EXLEVEL_NS_EL0, bit [20]

EXLEVEL_S_EL3, bit [19]

EXLEVEL_S_EL2, bit [18]

EXLEVEL_S_EL1, bit [17]

EXLEVEL_S_EL0, bit [16]

Bits [15:14]

CCITMIN, bits [11:0]
When TRCIDR0.TRCCCI == 0:

When TRCIDR0.TRCCCI == 1:

Otherwise:

Accessing TRCIDR3

TRCIDR3 can be accessed through the external debug interface:

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
NOOVERFLOW	NUMPROC[2:0]			SYSSTALL	STALLCTL	SYNCPR	TRCERR	RES0	EXLEVEL_NS_EL2	EXLEVEL_NS_EL1	EXLEVEL_NS_EL0	EXLEVEL_S_EL3	EXLEVEL_S_EL2	EXLEVEL_S_EL1	EXLEVEL_S_EL0	RES0		NUMPROC[4:3]		CCITMIN

TRCIDR3, Trace ID Register 3

Purpose

Configuration

Attributes

Field descriptions

NOOVERFLOW, bit [31]

NUMPROC, bits [13:12, 30:28]

SYSSTALL, bit [27]

STALLCTL, bit [26]

SYNCPR, bit [25]

TRCERR, bit [24]

Bit [23]

EXLEVEL_NS_EL2, bit [22]

EXLEVEL_NS_EL1, bit [21]

EXLEVEL_NS_EL0, bit [20]

EXLEVEL_S_EL3, bit [19]

EXLEVEL_S_EL2, bit [18]

EXLEVEL_S_EL1, bit [17]

EXLEVEL_S_EL0, bit [16]

Bits [15:14]

CCITMIN, bits [11:0]When TRCIDR0.TRCCCI == 0:

When TRCIDR0.TRCCCI == 1:

Otherwise:

Accessing TRCIDR3

TRCIDR3 can be accessed through the external debug interface:

CCITMIN, bits [11:0]
When TRCIDR0.TRCCCI == 0: